How To Put Batteries In Swiffer Wetjet?

How to Put Batteries in a Swiffer WetJet

Swiffer WetJets are a convenient way to clean your floors, but they can be a bit tricky to put batteries in. In this article, we will walk you through the process step-by-step, so you can get back to cleaning your floors in no time.

We’ll also provide some tips on how to make sure your Swiffer WetJet lasts as long as possible. So whether you’re a first-time user or you’re just looking for a refresher, read on for all the information you need to know about putting batteries in a Swiffer WetJet.

Step	Instructions	Image
1	Remove the battery cover on the back of the Swiffer Wetjet.
2	Insert two AA batteries into the battery compartment, making sure that the positive and negative terminals are aligned correctly.
3	Replace the battery cover.

This guide will show you how to put batteries in a Swiffer Wetjet. The Swiffer Wetjet is a popular cleaning tool that uses disposable cleaning pads to clean floors. The batteries power the Wetjet’s motor, which sprays water onto the pads and helps to loosen dirt and grime.

Gather the Materials

To put batteries in a Swiffer Wetjet, you will need the following materials:

• Swiffer Wetjet
• 4 AA batteries
• Phillips head screwdriver

Remove the Battery Cover

The first step is to remove the battery cover from the Swiffer Wetjet. To do this, follow these steps:

1. Locate the battery cover on the bottom of the Swiffer Wetjet.
2. Use the Phillips head screwdriver to loosen the screws that hold the battery cover in place.
3. Carefully remove the battery cover.

Insert the Batteries

Now that the battery cover is removed, you can insert the batteries into the Swiffer Wetjet. To do this, follow these steps:

1. Orient the batteries so that the positive and negative terminals are facing the correct way.
2. Insert the batteries into the battery compartment.
3. Replace the battery cover.

That’s it! You have now successfully put batteries in your Swiffer Wetjet. You can now use your Wetjet to clean your floors.

Here are some additional tips for using your Swiffer Wetjet:

• Use a fresh cleaning pad for each cleaning session.
• Rinse the cleaning pad thoroughly after each use.
• Store the Swiffer Wetjet in a dry place when not in use.

By following these tips, you can help to extend the life of your Swiffer Wetjet and keep your floors clean and fresh.

How To Put Batteries In Swiffer Wetjet?

1. Remove the Battery Cover

The first step is to remove the battery cover. To do this, locate the two screws on the back of the Swiffer Wetjet. Use a Phillips head screwdriver to unscrew the screws. Once the screws are removed, the battery cover can be lifted off.

2. Remove the Old Batteries

With the battery cover removed, you can now remove the old batteries. The batteries are located in a compartment on the inside of the Swiffer Wetjet. To remove the batteries, simply lift them up and out of the compartment.

3.Insert the Batteries

The next step is to insert the new batteries. The batteries should be inserted into the battery compartment, making sure that the positive and negative terminals are aligned correctly.

4.Replace the Battery Cover

Once the batteries are inserted, you can replace the battery cover. To do this, simply line up the battery cover with the Swiffer Wetjet and press down until it snaps into place.

5.Test the Swiffer Wetjet

The final step is to test the Swiffer Wetjet to make sure that it is working properly. To do this, turn on the Swiffer Wetjet and make sure that the light comes on. You can also test the Swiffer Wetjet by spraying it with water. If the Swiffer Wetjet is working properly, the water will be sprayed out of the nozzle.

By following these steps, you can easily put batteries in your Swiffer Wetjet. If you have any trouble, please consult the owner’s manual for your Swiffer Wetjet.

How do I put batteries in my Swiffer WetJet?

1. Remove the battery cover on the back of the Swiffer WetJet.
2. Insert two AA batteries, making sure that the positive and negative terminals are aligned correctly.
3. Replace the battery cover.

What type of batteries does the Swiffer WetJet take?

The Swiffer WetJet takes two AA batteries.

How long do the batteries last in the Swiffer WetJet?

The batteries in the Swiffer WetJet will last for approximately 45 minutes of continuous use.

What do I do if the batteries in my Swiffer WetJet are dead?

If the batteries in your Swiffer WetJet are dead, you will need to replace them with two new AA batteries.

How do I know if the batteries in my Swiffer WetJet are getting low?

The Swiffer WetJet will beep when the batteries are getting low. You will also notice that the cleaning performance of the Swiffer WetJet will decrease when the batteries are low.

Can I use rechargeable batteries in my Swiffer WetJet?

Yes, you can use rechargeable batteries in your Swiffer WetJet. However, you may need to purchase a separate charger for the batteries.

In this article, we have discussed how to put batteries in a Swiffer Wetjet. We have covered the steps in detail, and we have also provided some tips and tricks to help you get the job done quickly and easily.

We hope that this article has been helpful. If you have any questions or comments, please feel free to leave them below.

Key Takeaways

• To put batteries in a Swiffer Wetjet, you will need to remove the battery cover.
• The battery cover is located on the back of the Swiffer Wetjet.
• Insert the batteries into the battery compartment, making sure that the positive and negative terminals are aligned correctly.
• Replace the battery cover.
• Your Swiffer Wetjet is now ready to use.