How To Change Batteries In Purell Dispenser Es6?

How to Change Batteries in a Purell Dispenser ES6

The Purell Dispenser ES6 is a popular and effective way to keep your hands clean, but what happens when the batteries start to run low? Changing the batteries in your Purell Dispenser ES6 is a simple task that can be completed in just a few minutes.

In this article, we will walk you through the process of changing the batteries in your Purell Dispenser ES6. We will provide step-by-step instructions, as well as images to help you visualize the process.

By the end of this article, you will be able to change the batteries in your Purell Dispenser ES6 with confidence. So, let’s get started!

Step	Instructions	Image
1	Turn off the dispenser and unplug it from the outlet.
2	Locate the battery compartment on the back of the dispenser.
3	Use a coin to pry open the battery compartment.
4	Remove the old batteries.
5	Insert the new batteries, making sure to align the positive and negative terminals correctly.
6	Close the battery compartment.
7	Plug the dispenser back into the outlet and turn it on.

How to Change Batteries in Purell Dispenser ES6?

Tools and materials needed

• Phillips head screwdriver
• Replacement batteries (two AA batteries)

Steps to change batteries

1. Turn off the dispenser. To do this, press and hold the power button for 3 seconds. The power light will turn off.
2. Remove the battery cover. The battery cover is located on the back of the dispenser. To remove it, use a Phillips head screwdriver to loosen the two screws.
3. Remove the old batteries. The old batteries are located in the battery compartment. To remove them, gently lift them up and out of the compartment.
4. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are aligned correctly.
5. Replace the battery cover. Secure the battery cover in place by tightening the two screws.
6. Turn on the dispenser. To do this, press the power button. The power light will turn on.

Troubleshooting

If the dispenser is not working after you have changed the batteries, there may be a problem with the dispenser itself. Try resetting the dispenser by following these steps:

1. Turn off the dispenser. To do this, press and hold the power button for 3 seconds. The power light will turn off.
2. Unplug the dispenser from the power outlet.
3. Wait 5 seconds.
4. Plug the dispenser back into the power outlet.
5. Turn on the dispenser. To do this, press the power button. The power light will turn on.

If the dispenser is still not working, you may need to contact the manufacturer for assistance.

Changing the batteries in a Purell dispenser ES6 is a simple task that can be completed in a few minutes. By following the steps in this guide, you can keep your dispenser running smoothly and ensure that you are always able to access hand sanitizer when you need it.

How To Change Batteries In Purell Dispenser ES6

Step 1: Turn Off the Dispenser

Before you can change the batteries in your Purell dispenser, you need to turn it off. To do this, locate the power button on the back of the dispenser and press it. The power button is a small, round button with a power icon on it.

Step 2: Remove the Battery Cover

Once the dispenser is turned off, you can remove the battery cover. The battery cover is located on the back of the dispenser. To remove it, locate the two Phillips head screws on the back of the dispenser and unscrew them. Once the screws are removed, you can lift the battery cover off of the dispenser.

Step 3: Remove the Old Batteries

With the battery cover removed, you can now remove the old batteries. The old batteries are located in a compartment at the bottom of the dispenser. To remove them, simply lift up on the battery tabs and slide the batteries out of the compartment.

Step 4: Insert the New Batteries

Now that you have removed the old batteries, you can insert the new batteries. The new batteries should be AA batteries. To insert them, simply slide them into the battery compartment, making sure that the positive and negative terminals are aligned correctly.

Step 5: Replace the Battery Cover

Once the new batteries are inserted, you can replace the battery cover. To do this, simply place the battery cover back on the dispenser and screw the two Phillips head screws back in.

Step 6: Turn On the Dispenser

Now that you have replaced the battery cover, you can turn on the dispenser. To do this, locate the power button on the back of the dispenser and press it. The power button is a small, round button with a power icon on it.

By following these steps, you can easily change the batteries in your Purell dispenser ES6. Changing the batteries in your dispenser is a simple task that can be completed in just a few minutes. By keeping your dispenser properly maintained, you can ensure that it is always working properly and that you have access to clean hands when you need them.

How do I change the batteries in a Purell ES6 dispenser?

1. Turn off the dispenser and unplug it from the wall.
2. Locate the battery compartment on the back of the dispenser.
3. Use a coin to pry open the battery compartment.
4. Remove the old batteries.
5. Insert the new batteries, making sure to match the positive and negative terminals.
6. Close the battery compartment.
7. Plug the dispenser back into the wall and turn it on.

What type of batteries does the Purell ES6 dispenser use?

The Purell ES6 dispenser uses two AA batteries.

How long do the batteries last in the Purell ES6 dispenser?

The batteries in the Purell ES6 dispenser typically last for about six months. However, the battery life may vary depending on the usage of the dispenser.

What happens if the batteries in the Purell ES6 dispenser run out?

If the batteries in the Purell ES6 dispenser run out, the dispenser will stop dispensing hand sanitizer. You will need to replace the batteries to restore functionality to the dispenser.

How do I troubleshoot problems with the Purell ES6 dispenser?

If you are having problems with the Purell ES6 dispenser, here are a few things you can check:

• Make sure that the dispenser is turned on and plugged into the wall.
• Make sure that the battery compartment is closed properly.
• Try replacing the batteries with new ones.
• If the dispenser is still not working, you may need to contact the manufacturer for assistance.

  In this blog post, we have discussed how to change batteries in a Purell dispenser ES6. We have covered the steps in detail, with images to help you along the way. We hope that this information has been helpful, and that you are now able to change the batteries in your Purell dispenser ES6 with ease.

Here are some key takeaways from this blog post:

• To change the batteries in a Purell dispenser ES6, you will need to remove the cover, disconnect the battery leads, and then insert the new batteries.
• The cover is held in place by two screws. You can find these screws on the back of the dispenser.
• The battery leads are located at the bottom of the dispenser. They are connected to the battery terminals with a small tab.
• To disconnect the battery leads, simply push down on the tab and then pull the leads away from the terminals.
• To insert the new batteries, make sure that the positive (+) and negative (-) terminals are aligned correctly.
• Once the batteries are inserted, reconnect the battery leads and then replace the cover.

We hope that this information has been helpful, and that you are now able to change the batteries in your Purell dispenser ES6 with ease.