How To Turn Off Vtm-4 Acura Mdx?

How to Turn Off VTM-4 on an Acura MDX

The Acura MDX is a popular SUV that comes standard with Acura’s Vehicle Stability Assist (VSA) system. VSA includes a number of features that help to keep the vehicle stable, even in difficult driving conditions. One of these features is the Vehicle Torque Management (VTM-4) system, which helps to distribute power to the wheels that need it most.

In some cases, you may want to turn off VTM-4. For example, if you’re stuck in mud or snow, you may want to turn off VTM-4 so that you can spin the wheels freely. Or, if you’re driving on a slippery surface, you may want to turn off VTM-4 so that you have more control over the vehicle.

To turn off VTM-4 on an Acura MDX, follow these steps:

1. Turn the ignition to the “On” position.
2. Press the “VSA” button on the dashboard.
3. The VSA indicator light will turn off, indicating that VTM-4 has been disabled.

Note: Turning off VTM-4 will also disable other VSA features, such as traction control and electronic stability control. Be sure to only turn off VTM-4 when you’re in a safe location and when you’re aware of the risks involved.

| Step | Action | Result |
|—|—|—|
| 1 | Press the On/Off button on the VTM-4 control panel. | The VTM-4 system will be turned off. |
| 2 | Turn the VTM-4 knob to the Off position. | The VTM-4 system will be completely disabled. |
| 3 | Start the engine. | The VTM-4 system will be automatically enabled. |

How to Turn Off VTM-4 on Acura MDX

The VTM-4 (Variable Torque Management 4-Wheel Drive) system on the Acura MDX is a sophisticated all-wheel-drive system that can automatically distribute power to all four wheels as needed for improved traction and handling. However, there may be times when you may want to turn off the VTM-4 system, such as when driving on dry pavement or in slippery conditions.

To turn off the VTM-4 system on an Acura MDX, follow these steps:

Step 1: Locate the VTM-4 switch.

The VTM-4 switch is located on the center console, just below the climate control system. It is a small, black switch with a white “VTM-4” logo.

Step 2: Turn off the VTM-4 system.

To turn off the VTM-4 system, simply press the VTM-4 switch. The switch will illuminate red to indicate that the system is off.

Note: When the VTM-4 system is off, the Acura MDX will only drive with the front wheels. This means that you will have less traction and handling in slippery conditions.

Recommended: Only turn off the VTM-4 system when you are driving on dry pavement or in other conditions where all-wheel-drive is not necessary.

Important: If you turn off the VTM-4 system and then experience a loss of traction, you should turn the system back on immediately.

Turning off the VTM-4 system on an Acura MDX is a simple process that can be done in just a few seconds. However, it is important to only do this when necessary, as driving with the VTM-4 system off can reduce your traction and handling.

If you have any questions about turning off the VTM-4 system on your Acura MDX, please consult your owner’s manual or a qualified Acura dealer.

Step 3: Confirm that the VTM-4 system is off

Once you have turned off the VTM-4 system, you will need to confirm that it is actually off. To do this, follow these steps:

1. Turn the ignition switch to the “ON” position.
2. Press the VTM-4 button on the center console.
3. The VTM-4 indicator light should turn off.

If the VTM-4 indicator light is still on, the system is not turned off. Repeat steps 2 and 3 until the indicator light turns off.

Step 4: Re-engage the VTM-4 system if necessary

If you need to re-engage the VTM-4 system, follow these steps:

1. Turn the ignition switch to the “ON” position.
2. Press the VTM-4 button on the center console.
3. The VTM-4 indicator light should turn on.

Once the VTM-4 indicator light is on, the system is re-engaged.

In this article, you learned how to turn off the VTM-4 system on your Acura MDX. By following these steps, you can safely turn off the system when it is not needed. If you need to re-engage the system, you can do so by following the steps in the previous section.

Here are some additional tips for using the VTM-4 system:

• The VTM-4 system is designed to help you maintain traction in slippery conditions. However, it is not a substitute for safe driving practices. Always drive slowly and carefully in slippery conditions.
• If you are driving on a slippery surface and the VTM-4 system engages, do not panic. The system is working to help you maintain traction. Simply continue to drive slowly and carefully.
• If you are driving on a slippery surface and the VTM-4 system does not engage, you may need to have the system serviced. Contact your Acura dealer for more information.

  How do I turn off VTM-4 on my Acura MDX?

1. Press the VTM-4 button on the center console. The button is located below the climate control panel.
2. Turn the button to the “Off” position. The light next to the button will turn off, indicating that VTM-4 is disabled.

What happens when I turn off VTM-4?

When VTM-4 is turned off, the all-wheel drive system will be disabled. This means that the vehicle will only drive using the front wheels.

Why would I want to turn off VTM-4?

There are a few reasons why you might want to turn off VTM-4. For example, you might want to turn it off if you are driving on a dry road or if you are experiencing a problem with the all-wheel drive system.

Is it safe to drive with VTM-4 turned off?

Yes, it is safe to drive with VTM-4 turned off. However, you should be aware that the vehicle will only drive using the front wheels, which may affect handling and performance.

How do I turn VTM-4 back on?

To turn VTM-4 back on, simply press the button on the center console and turn it to the “On” position. The light next to the button will turn on, indicating that VTM-4 is enabled.

In this blog post, we have discussed how to turn off VTM-4 on an Acura MDX. We have provided step-by-step instructions on how to do this, as well as some tips and tricks to help you get the job done quickly and easily. We hope that this information has been helpful, and that you are now able to turn off VTM-4 on your Acura MDX whenever you need to.

Here are some key takeaways from this blog post:

• VTM-4 is a traction control system that helps to prevent your Acura MDX from slipping or sliding on slippery surfaces.
• You can turn off VTM-4 by pressing the VTM-4 button on the center console.
• Turning off VTM-4 can improve your vehicle’s performance on slippery surfaces, but it also increases the risk of sliding or spinning out.
• You should only turn off VTM-4 when you are in a controlled environment and are confident in your driving abilities.

We hope that this blog post has been helpful. If you have any other questions about VTM-4 or your Acura MDX, please do not hesitate to contact your local Acura dealer.