How To Take Harley Out Of Transport Mode?

How to Take Your Harley Out of Transport Mode

Harley-Davidson motorcycles are known for their powerful engines and sleek styling. But what if you need to transport your Harley, such as when you’re moving or taking it to a dealer for service? In this article, we’ll show you how to take your Harley out of transport mode so that you can ride it again.

We’ll also provide some tips on how to safely transport your Harley, so that you can get it to its destination without any damage. So whether you’re moving across the country or just taking your Harley to the shop, read on for all the information you need.

Step Action Explanation
1 Turn the ignition switch to the “Off” position. This will disable the engine and the electrical system.
2 Press and hold the “Mode” button for 5 seconds. This will cycle through the different modes, including Transport Mode.
3 Release the “Mode” button when the display shows “Off”. This will take the Harley out of Transport Mode.

What is Transport Mode?

Transport mode is a feature on Harley-Davidson motorcycles that allows you to easily move your bike around without having to start the engine. This can be useful for parking your bike in a tight spot, or for moving it around your garage or driveway.

To put your Harley in transport mode, follow these steps:

1. Turn the ignition switch to the “Off” position.
2. Press and hold the “Select” button on the left handlebar.
3. While holding the “Select” button, turn the ignition switch to the “On” position.
4. Release the “Select” button.

Your bike will now be in transport mode. The engine will not start, and the handlebars will be locked in place.

To take your Harley out of transport mode, follow these steps:

1. Turn the ignition switch to the “Off” position.
2. Press and hold the “Select” button on the left handlebar.
3. While holding the “Select” button, turn the ignition switch to the “On” position.
4. Release the “Select” button.

Your bike will now be out of transport mode, and you can start the engine.

How to Put Harley in Transport Mode

To put your Harley in transport mode, follow these steps:

1. Turn the ignition switch to the “Off” position.
2. Press and hold the “Select” button on the left handlebar.
3. While holding the “Select” button, turn the ignition switch to the “On” position.
4. Release the “Select” button.

Your bike will now be in transport mode. The engine will not start, and the handlebars will be locked in place.

You can also put your Harley in transport mode by using the following method:

1. Turn the ignition switch to the “Off” position.
2. Press and hold the “Select” button on the left handlebar.
3. While holding the “Select” button, turn the ignition switch to the “Run” position.
4. Release the “Select” button.

Your bike will now be in transport mode. The engine will not start, and the handlebars will be locked in place.

To take your Harley out of transport mode, follow these steps:

1. Turn the ignition switch to the “Off” position.
2. Press and hold the “Select” button on the left handlebar.
3. While holding the “Select” button, turn the ignition switch to the “On” position.
4. Release the “Select” button.

Your bike will now be out of transport mode, and you can start the engine.

Transport mode is a useful feature on Harley-Davidson motorcycles that allows you to easily move your bike around without having to start the engine. By following the steps in this article, you can easily put your Harley in and out of transport mode.

How to Take Harley Out of Transport Mode

Harley-Davidson motorcycles come with a transport mode that is designed to make it easier to move the bike around when it is not running. This mode disables the starter motor and the fuel pump, so that the bike cannot be started accidentally. However, it can also be a bit of a pain if you forget to turn it off before you start riding.

If you find yourself in this situation, don’t worry. It is easy to take Harley out of transport mode. Just follow these steps:

1. Turn the ignition key to the “On” position.
2. Press and hold the “Start” button for about 5 seconds.
3. The bike will start to make a series of chimes.
4. Release the “Start” button.
5. The bike will be out of transport mode and you will be able to start it normally.

Here are some additional tips for taking Harley out of transport mode:

  • If the bike does not start making chimes when you press the “Start” button, try turning the ignition key off and then back on again.
  • If the bike still does not start making chimes, you may need to have the transport mode reset by a Harley-Davidson dealer.

Troubleshooting

If you are having trouble taking Harley out of transport mode, here are some troubleshooting tips:

  • Make sure that you are following the steps in the correct order.
  • Check to make sure that the ignition key is turned to the “On” position.
  • Try turning the ignition key off and then back on again.
  • If the bike still does not start making chimes, you may need to have the transport mode reset by a Harley-Davidson dealer.

Here are some common reasons why Harleys might get stuck in transport mode:

  • The ignition switch is not in the correct position.
  • The battery is low.
  • The starter motor is not working properly.
  • The fuel pump is not working properly.

If you think that one of these reasons might be causing your problem, you should take your bike to a Harley-Davidson dealer for diagnosis and repair.

Taking Harley out of transport mode is a simple process that can be done in a few minutes. However, if you are having trouble, you should consult with a Harley-Davidson dealer for assistance.

How do I take my Harley out of transport mode?

1. Turn the ignition key to the OFF position.
2. Press and hold the SELECT button on the left handlebar.
3. While holding the SELECT button, turn the ignition key to the ON position.
4. Release the SELECT button.
5. The bike will now be out of transport mode.

What happens if I don’t take my Harley out of transport mode?

If you don’t take your Harley out of transport mode, you may experience the following issues:

  • The bike’s engine may not start.
  • The bike’s lights may not work.
  • The bike’s horn may not work.
  • The bike’s speedometer may not work.

How do I know if my Harley is in transport mode?

There are a few ways to tell if your Harley is in transport mode:

  • The bike’s odometer will display 0000.
  • The bike’s tachometer will not move.
  • The bike’s engine will not start.
  • The bike’s lights will not work.

Can I put my Harley in transport mode while it’s running?

No, you cannot put your Harley in transport mode while it’s running. To put your Harley in transport mode, you must turn the ignition key to the OFF position.

Can I put my Harley in transport mode while it’s parked?

Yes, you can put your Harley in transport mode while it’s parked. To put your Harley in transport mode, follow the steps outlined above.

How do I turn off transport mode on my Harley?

To turn off transport mode on your Harley, follow the steps outlined above.

In this tutorial, we have discussed how to take a Harley out of transport mode. We first discussed what transport mode is and why you might want to take your Harley out of it. Then, we provided step-by-step instructions on how to do so. Finally, we answered some common questions about transport mode.

We hope that this tutorial has been helpful. If you have any other questions, please do not hesitate to contact us.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.