How To Restring Troy Bilt Weed Eater?

How to Restring a Troy Bilt Weed Eater

Your Troy Bilt weed eater is a valuable tool for keeping your yard looking its best. But when the string breaks, it can be a pain to replace. Luckily, restringing a Troy Bilt weed eater is a relatively simple task that can be completed in just a few minutes.

In this article, we’ll walk you through the process of restringing your Troy Bilt weed eater, step-by-step. We’ll also provide some tips on how to keep your weed eater in good condition and avoid future string breaks.

So whether you’re a first-time weed eater owner or you’re just looking for a refresher, read on for all the information you need to know about restringing a Troy Bilt weed eater.

Step Instructions Image
1 Turn off the weed eater and disconnect the spark plug wire.
2 Remove the string head cover.
3 Remove the old string.
4 Thread the new string through the eyelets in the string head.
5 Tighten the string head cover.
6 Reconnect the spark plug wire.

How to Restring a Troy Bilt Weed Eater

This guide will show you how to restring a Troy Bilt weed eater. This is a relatively simple task that can be completed in a few minutes. However, it is important to follow the steps carefully to ensure that the weed eater is properly restringed and that you do not damage the machine.

Tools and Materials

  • Troy Bilt weed eater
  • Replacement string
  • Pliers
  • Wire cutters
  • Tape measure

Step-by-step Instructions

1. Turn off the weed eater and disconnect the spark plug wire. This will prevent the weed eater from starting accidentally while you are working on it.
2. Remove the old string. There are two ways to do this. The first way is to use the pliers to grip the end of the string and pull it out of the hole in the spool. The second way is to use the wire cutters to cut the string close to the spool.
3. Measure the new string. The new string should be the same length as the old string. To measure the old string, hold the weed eater upside down and stretch the string out so that it is straight. Then, use the tape measure to measure the length of the string.
4. Thread the new string through the spool. There are two holes in the spool. The first hole is located at the top of the spool and the second hole is located at the bottom of the spool. The new string should be threaded through both holes.
5. Tighten the string. Use the pliers to tighten the string. Be careful not to overtighten the string, as this could damage the weed eater.
6. Reconnect the spark plug wire. Once the string is properly tightened, reconnect the spark plug wire.
7. Test the weed eater. Turn on the weed eater and let it run for a few seconds. The weed eater should now be properly restringed and should be able to cut through weeds.

Restringing a Troy Bilt weed eater is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can ensure that your weed eater is properly restringed and that you do not damage the machine.

Here are some additional tips for restringing a Troy Bilt weed eater:

  • Use a high-quality string. A good-quality string will last longer and will cut through weeds more effectively.
  • Be careful not to overtighten the string. Overtightening the string can damage the weed eater.
  • Test the weed eater before using it. Make sure that the weed eater is properly restringed and that it is able to cut through weeds.

3. Remove the old string

To remove the old string from your Troy Bilt weed eater, follow these steps:

1. Turn off the weed eater and disconnect the spark plug wire.
2. Use a pair of pliers to remove the two screws that hold the string guide in place.
3. Remove the string guide.
4. Use a pair of scissors to cut the old string off of the spool.
5. Reinstall the string guide and tighten the screws.

4. Align the new string with the old string

To align the new string with the old string, follow these steps:

1. Thread the new string through the hole in the spool.
2. Pull the new string through the hole in the string guide.
3. Make sure that the new string is aligned with the old string.
4. Tighten the screws on the string guide.

By following these steps, you can easily restring your Troy Bilt weed eater. If you have any questions, please consult your owner’s manual or contact Troy Bilt customer service.

Here are some additional tips for restringing your Troy Bilt weed eater:

  • Use a sharp pair of scissors to cut the new string. A dull pair of scissors will make it difficult to thread the string through the holes in the spool and string guide.
  • Make sure that the new string is the same length as the old string. If the new string is too short, it will not be able to reach the ground and will not be effective at cutting weeds. If the new string is too long, it will be difficult to control and may damage the weed eater.
  • Tighten the screws on the string guide securely. If the screws are not tight enough, the string may come loose while you are using the weed eater.
  • Be careful not to cut yourself with the string. The string is sharp and can easily cut skin.

By following these tips, you can safely and easily restring your Troy Bilt weed eater.

How do I restring my Troy Bilt weed eater?

1. Turn off the weed eater and disconnect the spark plug wire.
2. Remove the string head cover.
3. Locate the old string and pull it out of the head.
4. Cut two new pieces of string to the same length.
5. Thread the new strings through the holes in the head.
6. Pull the strings tight and secure them in place with the string lock.
7. Replace the string head cover.
8. Reattach the spark plug wire and start the weed eater.

What size string do I need for my Troy Bilt weed eater?

The size of string you need for your Troy Bilt weed eater will depend on the model of weed eater. The string diameter is typically measured in inches. For most models, you will need a .095-inch string.

How often do I need to restring my Troy Bilt weed eater?

The frequency with which you need to restring your Troy Bilt weed eater will depend on how often you use it. If you use your weed eater regularly, you may need to restring it every few weeks. If you only use your weed eater occasionally, you may be able to go longer between restrings.

What can I do if my weed eater is not stringing properly?

There are a few things you can check if your weed eater is not stringing properly. First, make sure that the string is the correct size and that it is installed correctly. Second, check the string head for damage. If the string head is damaged, it will need to be replaced. Third, check the carburetor for problems. If the carburetor is dirty or clogged, it will need to be cleaned or repaired.

Where can I find replacement parts for my Troy Bilt weed eater?

You can find replacement parts for your Troy Bilt weed eater at most hardware stores or online retailers. You can also contact Troy Bilt directly for a list of authorized dealers.

In this blog post, we have discussed how to restring a Troy Bilt weed eater. We have covered the steps in detail, with images and videos to help you along the way. We hope that this information has been helpful and that you are now able to successfully restring your weed eater.

Here are some key takeaways:

  • Before you begin, make sure that you have the right tools and materials.
  • Follow the steps in the order that they are presented.
  • Be careful not to overtighten the string.
  • If you are still having trouble, consult your owner’s manual or a qualified technician.

Weed eaters are an essential tool for keeping your yard looking its best. By following these steps, you can keep your weed eater in good working order and ensure that it is always ready to use.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.