How To Reset Svc Tire Monitor Chevy Malibu?

How to Reset Svc Tire Monitor on Chevy Malibu

Your Chevy Malibu’s tire pressure monitoring system (TPMS) is an important safety feature that helps you keep your tires properly inflated. When a tire is low on air, the TPMS light on your dashboard will illuminate to alert you. You can reset the TPMS light by following these steps:

1. Turn off the ignition.
2. Locate the TPMS reset button. The button is usually located on the driver’s side door jamb or on the center console.
3. Press and hold the TPMS reset button for 5 seconds.
4. Turn on the ignition.
5. The TPMS light should turn off.

If the TPMS light does not turn off, you may need to have your tires serviced.

Step Action Explanation
1 Turn the ignition to ON (II). This will power on the instrument cluster.
2 Press and hold the SETTINGS button. This will open the settings menu.
3 Use the arrow buttons to scroll to the TIRE MONITOR menu. This menu will display the current tire pressure and status of the tire pressure monitoring system.
4 Press the SETTINGS button to select the TIRE MONITOR menu. This will open the tire pressure monitoring system settings.
5 Press and hold the SETTINGS button for 5 seconds. This will reset the tire pressure monitoring system.

Step 3: Wait for the TPMS Reset Indicator to Turn Off

After you have followed the steps above, the TPMS reset indicator on your Chevy Malibu should turn off. This means that the TPMS has been successfully reset and your tires are now properly inflated.

If the TPMS reset indicator does not turn off, you may need to repeat the steps above. If you are still unable to reset the TPMS, you may need to take your vehicle to a qualified automotive repair shop.

Step 4: Verify That the TPMS Has Been Reset

Once you have reset the TPMS, you can verify that it has been successful by checking the following:

  • The TPMS reset indicator should be off.
  • The tire pressure warning light should be off.
  • The tire pressure displayed on the instrument cluster should be accurate.

If you are unable to verify that the TPMS has been reset, you may need to repeat the steps above. If you are still unable to reset the TPMS, you may need to take your vehicle to a qualified automotive repair shop.

Resetting the TPMS on your Chevy Malibu is a simple process that can be completed in a few minutes. By following the steps above, you can ensure that your TPMS is properly functioning and that you are alerted to any changes in tire pressure.

How do I reset the Svc Tire Monitor on my Chevy Malibu?

1. Turn the ignition to the ON position, but do not start the engine.
2. Press and hold the Tire Pressure Monitoring System (TPMS) reset button located under the steering wheel.
3. You will hear a chime and see the TPMS light flash once. This indicates that the reset has been successful.
4. Turn the ignition off.

What does the Svc Tire Monitor light mean on my Chevy Malibu?

The Svc Tire Monitor light indicates that there is a problem with one or more of your tires. The light may be accompanied by a chime.

Here are some possible causes of the Svc Tire Monitor light:

  • A tire is low on air pressure.
  • A tire has been damaged.
  • The TPMS sensor is malfunctioning.

How do I check the tire pressure on my Chevy Malibu?

1. Park your car on a level surface.
2. Turn off the engine and allow the car to cool down.
3. Locate the tire pressure valve stems on each tire.
4. Use a tire pressure gauge to check the air pressure in each tire.
5. Refuel the tires as needed.

The recommended tire pressure for your Chevy Malibu is listed on a sticker inside the driver’s doorjamb.

How do I fix a low tire on my Chevy Malibu?

1. Park your car on a level surface.
2. Turn off the engine and allow the car to cool down.
3. Locate the low tire.
4. Use a tire pressure gauge to check the air pressure in the low tire.
5. Refuel the tire as needed.
6. Drive the car for a few miles to make sure the tire is properly inflated.

If the tire pressure light comes back on, there may be a problem with the TPMS sensor. You should have the sensor checked by a qualified mechanic.

How do I replace a TPMS sensor on my Chevy Malibu?

1. Park your car on a level surface.
2. Turn off the engine and allow the car to cool down.
3. Locate the TPMS sensor on the tire.
4. Remove the old sensor using a TPMS sensor removal tool.
5. Install the new sensor using a TPMS sensor installation tool.
6. Drive the car for a few miles to make sure the sensor is properly installed.

If you are not comfortable replacing a TPMS sensor, you should have the work done by a qualified mechanic.

In this blog post, we have discussed how to reset the SVC tire monitor on a Chevy Malibu. We have provided step-by-step instructions on how to do this, as well as some troubleshooting tips. We hope that this information has been helpful to you. If you have any further questions, please do not hesitate to contact us.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.