How To Reset Overclock Cpu?

Overclocking your CPU can give you a performance boost, but it also comes with some risks. If you overclock your CPU too much, you can damage it. It’s important to know how to reset your CPU if you ever overclock it too far.

In this article, we’ll show you how to reset your CPU overclock. We’ll also provide some tips on how to overclock your CPU safely. So whether you’re a seasoned overclocker or you’re just getting started, read on for all the information you need to know about resetting your CPU overclock.

How To Reset Overclock Cpu?

| Step | Action | Explanation |
|—|—|—|
| 1 | Power down your computer. | This will ensure that the CPU is not overclocked while you are resetting it. |
| 2 | Open the BIOS. | The BIOS is a set of instructions that tells your computer how to start up. You can access the BIOS by pressing a specific key (such as F2 or Delete) during the boot process. |
| 3 | Find the overclocking settings. | The overclocking settings will vary depending on your motherboard. However, they are typically located in the “Advanced” or “Performance” section of the BIOS. |
| 4 | Reset the overclocking settings to their default values. | This will return the CPU to its stock speed. |
| 5 | Save and exit the BIOS. | This will save the changes you have made and restart your computer. |
| 6 | Verify that the CPU is no longer overclocked. | You can do this by using a tool such as CPU-Z. |

Step 1: Save Your Work

Before you start overclocking your CPU, it’s important to save your work. This is because overclocking can be a risky process, and if something goes wrong, you could lose all of your data.

To save your work, open the File menu and select Save As. Then, choose a location on your hard drive to save your file and click Save.

Once you’ve saved your work, you can proceed to overclock your CPU.

Step 2: Power Down Your System

The next step is to power down your system. This is important because you need to make sure that your computer is completely turned off before you start overclocking your CPU.

To power down your system, press the power button on your computer. If your computer is a laptop, you may also need to hold down the Fn key while pressing the power button.

Once your computer is powered down, you can proceed to the next step.

Step 3: Enter the BIOS

The next step is to enter the BIOS. The BIOS is a set of instructions that your computer uses to start up. It’s also where you can configure your computer’s settings, including the CPU clock speed.

To enter the BIOS, you need to press a specific key during the boot process. The key that you need to press varies depending on your motherboard manufacturer.

Once you’ve entered the BIOS, you can proceed to the next step.

Step 4: Find the CPU Clock Speed Setting

Once you’re in the BIOS, you need to find the CPU clock speed setting. This setting is usually located in the Advanced or Overclocking section of the BIOS.

The CPU clock speed setting is usually labeled as “CPU Frequency” or “CPU Clock Speed.”

Once you’ve found the CPU clock speed setting, you can proceed to the next step.

Step 5: Increase the CPU Clock Speed

The next step is to increase the CPU clock speed. To do this, simply increase the value of the CPU clock speed setting.

The amount that you increase the CPU clock speed by will depend on your specific CPU and cooling system.

It’s important to increase the CPU clock speed gradually and test your system after each increase. This will help you to avoid any stability problems.

Step 6: Test Your System

Once you’ve increased the CPU clock speed, you need to test your system. This is important to make sure that your system is stable and that you haven’t caused any damage.

To test your system, you can run a stress test. There are a number of different stress tests available, but one popular option is Prime95.

Prime95 is a free stress test that you can download from the Internet.

Once you’ve downloaded and installed Prime95, you can run the stress test by opening the program and clicking the “Start” button.

Prime95 will then run a series of tests on your CPU. If your system is stable, the stress test will complete without any errors.

If your system is not stable, the stress test will crash or freeze. If this happens, you need to reduce the CPU clock speed and try again.

Step 7: Save Your BIOS Settings

Once you’ve found a stable CPU clock speed, you need to save your BIOS settings. To do this, simply exit the BIOS and save your changes.

Your computer will then reboot and the new CPU clock speed will be in effect.

Overclocking your CPU can be a great way to improve your computer’s performance. However, it’s important to do it carefully and to test your system thoroughly after each increase in the CPU clock speed.

By following these steps, you can safely overclock your CPU and get the most out of your computer.

Step 3: Clear the CMOS

The CMOS is a small chip on the motherboard that stores the BIOS settings, including the CPU clock speed. Clearing the CMOS will reset the BIOS to its default settings, which will restore the CPU to its stock speed.

To clear the CMOS, you will need to find the CMOS reset button or jumper on your motherboard. The CMOS reset button is usually a small button located near the battery on the motherboard. The CMOS reset jumper is usually a small set of pins located near the battery on the motherboard.

To clear the CMOS using the button, simply press the button for a few seconds. To clear the CMOS using the jumper, you will need to short the pins together using a screwdriver or other metal object.

Once you have cleared the CMOS, you will need to restart your computer. The BIOS settings will be reset to their default values, and the CPU will be running at its stock speed.

Step 4: Verify That Your CPU Is Running at Stock Speeds

Once you have cleared the CMOS, you can verify that your CPU is running at stock speeds by using a CPU-Z benchmark. CPU-Z is a free software program that can be used to monitor and identify your CPU.

To use CPU-Z, simply download and install the program. Once the program is installed, open it and click on the “CPU” tab. The “CPU” tab will display information about your CPU, including its clock speed.

If the clock speed listed in CPU-Z matches the stock speed of your CPU, then your CPU is running at stock speeds. If the clock speed is different from the stock speed, then your CPU is overclocked.

If your CPU is overclocked, you can either leave it overclocked or you can reset it to its stock speed. To reset your CPU to its stock speed, you will need to follow the steps in the “How to Reset Overclocked CPU” guide.

Overclocking your CPU can improve its performance, but it can also be dangerous if done incorrectly. If you are not sure how to overclock your CPU, it is best to leave it at its stock speed.

If you do decide to overclock your CPU, be sure to do your research and follow the instructions carefully. Overclocking your CPU can be a fun and rewarding experience, but it is important to do it safely.

How do I reset my overclocked CPU?

There are a few different ways to reset an overclocked CPU. The best way for you will depend on your specific motherboard and CPU.

**1. Using the BIOS**

The BIOS is a firmware that is stored on a chip on your motherboard. It is responsible for initializing the hardware on your computer and loading the operating system. You can use the BIOS to reset your overclocked CPU by following these steps:

1. Power off your computer and unplug it from the power outlet.
2. Press the power button on your computer to turn it on.
3. As soon as you see the BIOS splash screen, start pressing the **Delete** key on your keyboard. This will take you into the BIOS setup.
4. Use the arrow keys to navigate to the **Overclocking** or **Performance** section.
5. Find the setting that allows you to reset the CPU to its default settings.
6. Press **Enter** to select the setting.
7. Save your changes and exit the BIOS.
8. Power on your computer and your CPU will be reset to its default settings.

**2. Using Windows**

You can also reset your overclocked CPU using Windows by following these steps:

1. Open the **Settings** app.
2. Go to **System** > **Recovery**.
3. Under **Advanced startup**, click **Restart now**.
4. Your computer will restart and you will be taken to the **Advanced Startup** menu.
5. Click **Troubleshoot** > **Advanced options** > UEFI Firmware Settings.
6. Your computer will restart and you will be taken to the BIOS setup.
7. Use the arrow keys to navigate to the Overclocking or Performance section.
8. Find the setting that allows you to reset the CPU to its default settings.
9. Press Enter to select the setting.
10. Save your changes and exit the BIOS.
11. Your computer will restart and your CPU will be reset to its default settings.

3. Using a third-party tool

There are a number of third-party tools that can be used to reset an overclocked CPU. These tools typically offer a more user-friendly interface than the BIOS or Windows, and they may also include additional features such as overclocking profiles and performance monitoring.

Some popular third-party tools for resetting an overclocked CPU include:

• Intel Extreme Tuning Utility (XTU)
• AMD Ryzen Master
• ASUS AI Suite
• Gigabyte EasyTune

4. Troubleshooting

If you are having trouble resetting your overclocked CPU, there are a few things you can check:

• Make sure that you are using the correct BIOS settings.
• Make sure that you are using the correct third-party tool.
• Make sure that your computer is properly cooled.
• If you are still having trouble, you may need to contact your motherboard manufacturer or CPU manufacturer for support.

What are the risks of overclocking my CPU?

Overclocking your CPU can increase its performance, but it also comes with some risks. These risks include:

• Increased power consumption. Overclocking your CPU will increase its power consumption, which can lead to higher electricity bills.
• Increased heat production. Overclocking your CPU will also increase its heat production, which can lead to overheating and damage to your CPU.
• Reduced stability. Overclocking your CPU can make it less stable, which can lead to crashes and data loss.
• Reduced warranty. Overclocking your CPU may void your warranty.

It is important to weigh the risks and benefits of overclocking your CPU before you decide to do it. If you do decide to overclock your CPU, make sure that you do it carefully and that you monitor your CPU’s temperature and stability.

How can I tell if my CPU is overclocked?

There are a few ways to tell if your CPU is overclocked.

• The BIOS. You can check the BIOS to see if your CPU is overclocked. The BIOS is a firmware that is stored on a chip on your motherboard. It is responsible for initializing the hardware on your computer and loading the operating system. You can access the BIOS by pressing a specific key on your keyboard (usually Delete or F2) during the boot process. Once you are in the BIOS, look for a setting that says something like “CPU Clock Speed” or “CPU Frequency.” If this setting is higher than the default speed for your CPU, then your CPU is overclocked.
• The operating system.

  resetting an overclocked CPU is a relatively simple process that can be completed in a few minutes. However, it is important to note that this process will also reset the BIOS to its default settings, which may affect other aspects of your computer’s performance. Therefore, it is important to be aware of these potential consequences before proceeding.

If you are confident that you want to reset your CPU, the following steps will walk you through the process:

1. Power down your computer and disconnect all power cables.
2. Open the chassis and locate the CMOS battery.
3. Use a small screwdriver to gently pry up the battery and remove it from the motherboard.
4. Wait for a few minutes to allow the CMOS to reset.
5. Reinstall the CMOS battery and close the chassis.
6. Power on your computer and enter the BIOS.
7. Use the BIOS settings to restore your CPU to its default clock speed.
8. Save your changes and exit the BIOS.

Once you have completed these steps, your CPU will be reset to its default settings and you can resume using your computer as normal.