How To Reset Arlo Base Station?

How to Reset Arlo Base Station

Your Arlo base station is the central hub of your security system. It’s where your cameras connect to, and where your footage is stored. If you’re having problems with your Arlo base station, or if you just want to start fresh, resetting it can be a quick and easy solution.

In this article, we’ll show you how to reset your Arlo base station in just a few simple steps. We’ll also provide some tips on troubleshooting common problems.

So if you’re ready to learn how to reset your Arlo base station, read on!

Step	Action	Explanation
1	Power off the Arlo Base Station	Press and hold the power button on the back of the Base Station for 5 seconds.
2	Wait 5 seconds	The Base Station will power off.
3	Power on the Arlo Base Station	Press and hold the power button on the back of the Base Station for 5 seconds.
4	The Base Station will reboot	The Base Station will display a blue light.

Your Arlo base station is the central hub of your Arlo security system. It’s where your cameras connect to, and where your footage is stored. If you’re having problems with your Arlo system, resetting your base station may be the solution.

A reset will restore your base station to its factory settings, which means that you’ll need to re-add your cameras and set up your system again. However, it can also fix a variety of problems, such as:

• Your cameras not connecting to the base station
• Your footage not recording
• The base station not turning on

If you’re experiencing any of these problems, resetting your base station is worth a try.

What is a Reset?

A reset is a way to restore a device to its factory settings. This means that all of your settings will be erased, and the device will be like new.

Resetting your Arlo base station is a relatively simple process, but it’s important to understand what it will do before you start. Once you reset your base station, you’ll need to re-add your cameras and set up your system again.

How to Reset an Arlo Base Station

To reset your Arlo base station, follow these steps:

1. Turn off the base station by unplugging it from the power outlet.
2. Wait 10 seconds.
3. Plug the base station back into the power outlet.
4. Press and hold the reset button on the back of the base station for 10 seconds.
5. The base station will blink blue and then green.
6. You can now release the reset button.

Your Arlo base station has now been reset. You can now re-add your cameras and set up your system again.

Resetting your Arlo base station is a relatively simple process, but it can be a helpful way to fix a variety of problems. If you’re experiencing any issues with your Arlo system, resetting your base station is worth a try.

Here are some additional resources that you may find helpful:

• [Arlo Support: How to Reset Your Base Station](https://support.arlo.com/hc/en-us/articles/360002020334-How-to-Reset-Your-Base-Station)
• [Arlo Community: Reset Your Base Station](https://community.arlo.com/t5/Arlo-Pro/Reset-Your-Base-Station/td-p/150247)

How to Reset an Arlo Base Station

If you’re having trouble with your Arlo camera system, resetting the base station may be the solution. Resetting the base station will erase all of the settings and data, so you’ll need to re-add your cameras and re-configure your settings. However, resetting the base station can also fix a variety of problems, such as:

• Cameras not connecting to the base station
• The base station not connecting to the internet
• The base station not recording video
• The base station not sending push notifications

Before you reset your base station, make sure that you have the following information:

• The username and password for your Arlo account
• The serial number of your base station

To reset your Arlo base station, follow these steps:

1. Turn off the base station.
2. Locate the reset button on the back of the base station.
3. Press and hold the reset button for 10 seconds.
4. The base station will power on and the LED will blink blue.
5. Release the reset button.

Once the base station has been reset, you’ll need to re-add your cameras and re-configure your settings. To do this, follow the instructions in the Arlo app.

What Happens When You Reset an Arlo Base Station?

When you reset an Arlo base station, the following things will happen:

• All of the settings on the base station will be erased.
• All of the data on the base station will be erased.
• All of the cameras will be disconnected from the base station.

After the base station has been reset, you’ll need to re-add your cameras and re-configure your settings. To do this, follow the instructions in the Arlo app.

Troubleshooting

If you’re having trouble with your Arlo base station after resetting it, here are a few things you can try:

• Make sure that your base station is connected to a power outlet and that the power cord is securely plugged in.
• Make sure that your base station is connected to the internet.
• Make sure that your Arlo cameras are turned on and that they are within range of the base station.
• Try restarting your base station.
• Try resetting your Arlo cameras.
• Try updating the firmware on your Arlo base station and cameras.
• Contact Arlo support for help.

If you’re still having trouble with your Arlo base station after trying these troubleshooting steps, you can contact Arlo support for help.

Resetting your Arlo base station can be a helpful way to fix a variety of problems. However, it’s important to remember that resetting the base station will erase all of the settings and data on the base station. So, before you reset your base station, make sure that you have the following information:

• The username and password for your Arlo account
• The serial number of your base station

If you’re having trouble with your Arlo base station after resetting it, try the troubleshooting steps in this article. If you’re still having trouble, you can contact Arlo support for help.

How do I reset my Arlo Base Station?

There are two ways to reset your Arlo Base Station:

1. Factory reset. This will erase all of your settings and data from the Base Station. To factory reset your Base Station, follow these steps:

1. Power off the Base Station.
2. Press and hold the reset button on the back of the Base Station for 10 seconds.
3. The Base Station will power on and the LED will flash blue.
4. Once the LED stops flashing blue, the Base Station has been factory reset.

2. Soft reset. This will not erase your settings or data from the Base Station. To soft reset your Base Station, follow these steps:

1. Power off the Base Station.
2. Unplug the power cable from the Base Station.
3. Wait 10 seconds.
4. Plug the power cable back into the Base Station.
5. Power on the Base Station.

What happens when I reset my Arlo Base Station?

When you reset your Arlo Base Station, the following things will happen:

• All of your settings and data will be erased from the Base Station.
• The Base Station will be restored to its factory default settings.
• The Base Station will be disconnected from your Wi-Fi network.
• You will need to re-add the Base Station to your Wi-Fi network and re-configure your settings.

Why do I need to reset my Arlo Base Station?

There are a few reasons why you might need to reset your Arlo Base Station:

• If you are experiencing problems with your Base Station, resetting it may resolve the issue.
• If you have forgotten your Base Station password, resetting it will allow you to create a new password.
• If you are selling or giving away your Arlo system, resetting the Base Station will ensure that your personal data is not transferred to the new owner.

**What should I do after I reset my Arlo Base Station?

After you reset your Arlo Base Station, you will need to:

1. Re-add the Base Station to your Wi-Fi network.
2. Re-configure your settings.
3. Re-add your cameras to the Base Station.

For instructions on how to do these things, please refer to the Arlo user manual.

Can I reset my Arlo Base Station remotely?

No, you cannot reset your Arlo Base Station remotely. You must physically power off the Base Station and press the reset button.

resetting your Arlo base station is a simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can quickly and easily restore your base station to its factory default settings. This can be helpful if you are experiencing problems with your Arlo system, or if you simply want to start fresh.

Here are the key takeaways from this guide:

• To reset your Arlo base station, you will need to locate the reset button and press and hold it for 10 seconds.
• The reset button is located on the back of the base station, near the power jack.
• After resetting your base station, you will need to re-add it to your Arlo account.
• Resetting your base station will delete all of your settings and recordings.
• It is important to only reset your base station as a last resort, as this will delete all of your settings and recordings.

By following these steps, you can quickly and easily reset your Arlo base station and restore it to its factory default settings.