How To Replace Tension Spring On John Deere Mower Deck?

How to Replace a Tension Spring on a John Deere Mower Deck

Your John Deere lawn mower is a valuable asset, and it’s important to keep it in good working order. One of the most important parts of a lawn mower deck is the tension spring. This spring helps to keep the deck in place and prevents it from bouncing up and down. If the tension spring breaks, the deck will not be able to function properly.

Replacing a tension spring on a John Deere mower deck is a relatively simple task, but it does require some basic tools and mechanical skills. In this article, we will walk you through the process of replacing a tension spring on a John Deere lawn mower deck.

We’ll start by providing a brief overview of the tension spring and its function. Then, we’ll discuss the tools and materials you’ll need to complete the job. Finally, we’ll walk you through the steps of replacing the tension spring.

By following these steps, you can easily replace a tension spring on your John Deere lawn mower deck. This will help to keep your mower in good working order and ensure that you can enjoy a smooth, even cut every time you mow your lawn.

Step	Instructions	Image
1	Locate the tension spring on the mower deck. It is a long, thin spring that is located near the center of the deck.
2	Use a wrench to loosen the bolt that is holding the tension spring in place.
3	Remove the tension spring from the mower deck.
4	Install the new tension spring in the same location as the old spring.
5	Tighten the bolt that is holding the tension spring in place.

Tools and Materials Needed

To replace the tension spring on a John Deere mower deck, you will need the following tools and materials:

• A Phillips head screwdriver
• A flathead screwdriver
• A pair of pliers
• A new tension spring
• A lubricant

Step-by-Step Instructions

1. Turn off the mower and disconnect the spark plug wire. This will prevent the mower from starting accidentally while you are working on it.
2. Locate the tension spring. The tension spring is located on the underside of the mower deck, near the center. It is a long, thin spring that is attached to the deck with two bolts.
3. Remove the bolts that hold the tension spring in place. Use a Phillips head screwdriver to loosen the bolts, then remove them with a pair of pliers.
4. Carefully remove the tension spring. The tension spring is under tension, so be careful not to let it snap back and hit you.
5. Install the new tension spring. Make sure that the new tension spring is the same length and type as the old one. Align the spring with the holes in the deck, then insert the bolts and tighten them with a Phillips head screwdriver.
6. Reattach the spark plug wire.
7. Test the mower. Start the mower and let it run for a few minutes. Check to make sure that the mower is operating properly and that the tension spring is working correctly.

Replacing the tension spring on a John Deere mower deck is a relatively simple task that can be completed in a few minutes. By following these steps, you can ensure that your mower is operating properly and that the tension spring is working correctly.

How To Replace Tension Spring On John Deere Mower Deck?

This guide will show you how to replace the tension spring on a John Deere lawn mower deck. The tension spring is located on the deck, and it helps to keep the mower deck in place. If the tension spring is broken or damaged, it can cause the mower deck to sag or wobble. This can make it difficult to mow your lawn, and it can also damage the mower deck.

To replace the tension spring, you will need the following tools:

• A Phillips head screwdriver
• A flathead screwdriver
• A 10mm wrench
• A new tension spring

1. Locate the tension spring. The tension spring is located on the deck, near the front of the mower. It is a long, thin spring that is attached to the deck with two bolts.
2. Remove the bolts that hold the tension spring in place. Use a Phillips head screwdriver to remove the two bolts that hold the tension spring in place.
3. Remove the old tension spring. Once the bolts are removed, you can remove the old tension spring. Use a flathead screwdriver to pry the spring loose from the deck.
4. Install the new tension spring. Slide the new tension spring onto the deck. Make sure that the spring is installed in the correct direction.
5. Secure the new tension spring with the bolts. Use a Phillips head screwdriver to secure the new tension spring with the bolts.

That’s it! You have now successfully replaced the tension spring on your John Deere lawn mower deck.

Troubleshooting

If you are having trouble replacing the tension spring on your John Deere lawn mower deck, here are a few troubleshooting tips:

• Make sure that you have the correct tools and parts.
• Follow the instructions carefully.
• If you are still having trouble, you can contact a qualified lawn mower repair technician for help.

Additional Tips

Here are a few additional tips for replacing the tension spring on your John Deere lawn mower deck:

• When you are removing the old tension spring, be careful not to damage the deck.
• When you are installing the new tension spring, make sure that it is installed in the correct direction.
• Tighten the bolts that hold the tension spring in place securely, but do not overtighten them.

By following these tips, you can easily and safely replace the tension spring on your John Deere lawn mower deck.

Replacing the tension spring on a John Deere lawn mower deck is a relatively simple task. By following the steps in this guide, you can easily and safely complete the job. If you have any questions or concerns, you can always contact a qualified lawn mower repair technician for help.

How to Replace Tension Spring on John Deere Mower Deck?

1. What tools do I need?

• Replacement tension spring
• 1/2-inch wrench
• 1/4-inch socket wrench
• Pliers
• Flathead screwdriver

2. How do I remove the old tension spring?
1. Locate the tension spring on the mower deck. It is a long, thin spring that is located near the center of the deck.
2. Use the 1/2-inch wrench to loosen the nut that secures the tension spring to the mower deck.
3. Use the 1/4-inch socket wrench to loosen the bolt that secures the tension spring to the deck.
4. Use the pliers to pry the tension spring off of the deck.

3. How do I install the new tension spring?
1. Align the new tension spring with the old tension spring.
2. Insert the bolt through the hole in the tension spring and through the hole in the deck.
3. Use the 1/4-inch socket wrench to tighten the bolt.
4. Use the 1/2-inch wrench to tighten the nut.

4. What are the common problems with replacing a tension spring on a John Deere mower deck?

• The most common problem is cross-threading the bolt when tightening it. This can damage the threads on the bolt and make it difficult to remove the bolt in the future.
• Another common problem is not tightening the bolt enough. This can cause the tension spring to come loose and damage the mower deck.
• Finally, it is important to make sure that the tension spring is properly aligned before tightening the bolt. If the tension spring is not aligned correctly, it can damage the mower deck.

5. How can I avoid these problems?

• To avoid cross-threading the bolt, make sure that the bolt is inserted straight into the hole.
• To avoid not tightening the bolt enough, use a torque wrench to tighten the bolt to the correct specification.
• To avoid misalignment, carefully align the tension spring with the old tension spring before tightening the bolt.

6. What are the benefits of replacing a tension spring on a John Deere mower deck?

• Replacing a tension spring can improve the performance of your mower deck. A properly tensioned spring will help to keep the mower deck level and prevent it from bouncing.
• Replacing a tension spring can also extend the life of your mower deck. A properly tensioned spring will help to prevent the mower deck from wearing out prematurely.

7. How often should I replace the tension spring on my John Deere mower deck?

• The frequency with which you need to replace the tension spring will depend on the amount of use your mower gets. If you use your mower frequently, you may need to replace the tension spring more often. If you only use your mower occasionally, you may be able to get away with replacing the tension spring less often.

8. Where can I buy a replacement tension spring for my John Deere mower deck?

• You can purchase a replacement tension spring for your John Deere mower deck at your local John Deere dealer or online.

  In this blog post, we have discussed how to replace the tension spring on a John Deere mower deck. We have provided a step-by-step guide, as well as some tips and tricks to make the process easier. We hope that this information has been helpful, and that you are now able to replace the tension spring on your mower deck with confidence.

Here are some key takeaways from this blog post:

• The tension spring is an important part of the mower deck, and it helps to keep the blade in place.
• If the tension spring is broken or damaged, it can cause the blade to come loose and fly off, which can be dangerous.
• Replacing the tension spring is a relatively simple task, but it is important to follow the steps carefully to avoid injury.
• If you are not comfortable working on your own mower, you can always take it to a qualified mechanic.