How To Remove Kitchenaid Freezer Drawer?

How to Remove a KitchenAid Freezer Drawer

Your KitchenAid freezer drawer is a convenient way to store and organize frozen food. But what happens when you need to remove it for cleaning or maintenance? Don’t worry, it’s a simple process that anyone can do.

In this article, we’ll walk you through the steps of removing and reinstalling a KitchenAid freezer drawer. We’ll also provide tips on how to clean and maintain your freezer drawer so that it stays in good condition for years to come.

So if you’re ready to learn how to remove a KitchenAid freezer drawer, read on!

Step	Instructions	Image
1	Unplug the refrigerator and disconnect the water line.
2	Locate the release lever on the front of the drawer.
3	Press the release lever and pull the drawer out.

How To Remove Kitchenaid Freezer Drawer?

Tools and Materials Needed

• Phillips head screwdriver
• Flathead screwdriver
• Adjustable wrench
• Penetrating oil
• Rags

Steps to Remove the Freezer Drawer

1. Unplug the refrigerator. This is an important safety precaution to take before beginning any work on your refrigerator.
2. Remove the toe kick panel. This is usually held in place by two screws located at the front of the refrigerator. Once the screws are removed, you can simply pry the panel up and off.
3. Locate the screws that hold the freezer drawer in place. There are usually two screws located at the front of the drawer and two screws located at the back.
4. Use a Phillips head screwdriver to remove the screws. Be careful not to drop the screws into the freezer.
5. Apply penetrating oil to the hinge pins. This will help to loosen the pins and make them easier to remove.
6. Use a flathead screwdriver to pry the hinge pins out of the freezer drawer. Be careful not to damage the drawer.
7. Carefully lift the freezer drawer out of the refrigerator. Be careful not to spill any food or liquid.
8. Reinstall the toe kick panel.
9. Plug the refrigerator back in.

Your freezer drawer is now removed and you can clean it or replace it as needed.

Removing a Kitchenaid freezer drawer is a relatively simple task that can be completed in a few minutes. By following these steps, you can safely and easily remove your freezer drawer for cleaning or replacement.

How to Remove Kitchenaid Freezer Drawer

This guide will show you how to remove the freezer drawer on a Kitchenaid refrigerator. The process is relatively simple, but there are a few things you need to know before you get started.

1. Gather your tools.

You will need the following tools to remove the freezer drawer:

• A Phillips head screwdriver
• A flathead screwdriver
• A pry bar
• A towel

2. Unplug the refrigerator.

Before you do anything else, make sure to unplug the refrigerator. This will prevent you from accidentally getting shocked.

3. Remove the toe kick panel.

The toe kick panel is located at the bottom of the refrigerator. It is held in place by a few screws. Use a Phillips head screwdriver to remove the screws.

4. Remove the freezer drawer.

Once the toe kick panel is removed, you will be able to access the freezer drawer. There is a metal bar that runs along the front of the drawer. Use a flathead screwdriver to pry up the bar. This will release the drawer from the tracks.

5. Lift out the freezer drawer.

Once the bar is released, you can lift out the freezer drawer. Be careful not to spill any food.

6. Clean the freezer drawer.

Before you reinstall the freezer drawer, take some time to clean it. This will help to prevent the growth of mold and bacteria.

7. Reinstall the freezer drawer.

To reinstall the freezer drawer, simply reverse the steps you took to remove it. Make sure that the drawer is properly seated in the tracks before you replace the toe kick panel.

8. Plug in the refrigerator.

Once the freezer drawer is reinstalled, you can plug in the refrigerator. The refrigerator should now be working properly.

Removing the freezer drawer on a Kitchenaid refrigerator is a relatively simple task. By following the steps in this guide, you can safely and easily remove the drawer for cleaning or repairs.

How do I remove a Kitchenaid freezer drawer?

1. Unplug the refrigerator. This is a safety precaution to prevent you from getting shocked.
2. Locate the release lever. The release lever is usually located on the front of the drawer, near the bottom.
3. Press down on the release lever and pull out on the drawer. The drawer should come out easily.
4. Repeat steps 2-3 for each drawer you want to remove.

What if the drawer is stuck?

1. Try wiggling the drawer back and forth. This may loosen it enough to pull it out.
2. Apply a little bit of oil to the tracks. This can help to lubricate the drawer and make it easier to remove.
3. If the drawer is still stuck, you may need to use a tool to pry it open. Be careful not to damage the drawer or the refrigerator.

How do I put the drawers back in?

1. Line up the drawer with the tracks. The tracks are usually located on the sides of the refrigerator.
2. Push the drawer in until it clicks into place. You should hear a click sound when the drawer is properly inserted.
3. Repeat steps 1-2 for each drawer you want to put back in.

What should I do if the drawers are not aligned properly?

1. Check to make sure that the drawers are inserted all the way. The drawers should be inserted until they click into place.
2. If the drawers are still not aligned properly, you may need to adjust the tracks. The tracks are usually located on the sides of the refrigerator. You can adjust them by loosening the screws and moving them to the desired position.
3. Once the tracks are adjusted, tighten the screws.

What if the drawers are not closing properly?

1. Check to make sure that the drawers are aligned properly. The drawers should be inserted all the way and aligned with the tracks.
2. If the drawers are still not closing properly, you may need to adjust the tracks. The tracks are usually located on the sides of the refrigerator. You can adjust them by loosening the screws and moving them to the desired position.
3. Once the tracks are adjusted, tighten the screws.
4. If the drawers are still not closing properly, you may need to replace the gaskets. The gaskets are the rubber seals around the drawers. They help to create a tight seal and prevent air from escaping. You can replace the gaskets by following the instructions in your refrigerator’s owner’s manual.

removing a Kitchenaid freezer drawer is a relatively simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can safely and easily remove your freezer drawer for cleaning or other maintenance purposes.

Here are the key takeaways:

• To remove the drawer, first locate the release lever and pull it up.
• Next, grasp the front of the drawer and pull it out until it is completely free.
• Be careful not to drop the drawer, as it is heavy.
• Once the drawer is removed, you can clean it or perform other maintenance tasks.
• To reinstall the drawer, simply reverse the steps above.