How To Remove Hinged Tonneau Cover?

How to Remove a Hinged Tonneau Cover

Your hinged tonneau cover is a great way to keep your truck bed protected from the elements, but it can also be a pain to remove. If you’re looking to clean your truck bed or install a new tonneau cover, you’ll need to know how to remove the old one.

In this article, we’ll walk you through the process of removing a hinged tonneau cover, step-by-step. We’ll also provide some tips and tricks to make the job easier.

So whether you’re a first-time DIYer or you’re just looking for a refresher, read on for all the information you need to know about removing a hinged tonneau cover.

How To Remove Hinged Tonneau Cover?

| Step | Action | Tools |
|—|—|—|
| 1 | Open the tailgate. | |
| 2 | Locate the two bolts that hold the tonneau cover in place. | Wrench |
| 3 | Remove the bolts. | |
| 4 | Lift up on the tonneau cover and remove it from the truck bed. | |
| 5 | Close the tailgate. | |

A hinged tonneau cover is a type of truck bed cover that is hinged at the back and opens up like a door. This type of cover is popular because it provides easy access to the truck bed, while still keeping the contents secure. However, if your hinged tonneau cover is damaged or you simply want to remove it, it can be a bit of a challenge. In this article, we will walk you through the steps on how to remove a hinged tonneau cover.

Tools and Materials

• Ratchet and socket
• Wrench
• Penetrating oil
• Rags
• Safety glasses

Step-by-step Instructions

1. Remove the tailgate. The first step is to remove the tailgate. To do this, open the tailgate and locate the two bolts that secure it to the truck bed. Using a ratchet and socket, loosen and remove the bolts. Be careful not to drop the bolts into the truck bed.
2. Locate the hinge pins. Once the tailgate is removed, you will be able to see the hinge pins that secure the tonneau cover to the truck bed. There will be two hinge pins, one on each side of the truck bed.
3. Remove the hinge pins. To remove the hinge pins, you will need to use a wrench. Insert the wrench into the hole in the hinge pin and turn it counterclockwise. The hinge pin will come out of the truck bed. Repeat this process for the other hinge pin.
4. Remove the tonneau cover. Now that the hinge pins are removed, you can remove the tonneau cover. Simply lift up on the cover and pull it away from the truck bed. The cover may be a bit stuck, so you may need to use a little force to remove it.
5. Clean the hinge pins. Once the tonneau cover is removed, you will need to clean the hinge pins. This will help to prevent rust and corrosion. To clean the hinge pins, use a rag and some penetrating oil. Apply the penetrating oil to the hinge pins and let it sit for a few minutes. Then, use the rag to wipe away the dirt and debris.
6. Reinstall the hinge pins. Once the hinge pins are clean, you can reinstall them. To do this, insert the hinge pins into the holes in the truck bed. Then, use a wrench to turn the hinge pins clockwise until they are secure.
7. Reinstall the tailgate. Now that the hinge pins are reinstalled, you can reinstall the tailgate. To do this, align the tailgate with the truck bed and insert the two bolts. Then, use a ratchet and socket to tighten the bolts.

That’s it! You have now successfully removed and reinstalled a hinged tonneau cover. This process may seem daunting at first, but it is actually quite simple. By following these steps, you can easily remove and reinstall your tonneau cover whenever you need to.

How To Remove Hinged Tonneau Cover?

A tonneau cover is a type of truck bed cover that is attached to the truck bed with hinges. It can be used to protect cargo from the elements, theft, and vandalism. To remove a hinged tonneau cover, you will need the following tools:

• A ratchet and socket set
• A screwdriver
• Penetrating oil

Open the tonneau cover and locate the hinge bolts.

The first step is to open the tonneau cover and locate the hinge bolts. The hinge bolts are usually located on the inside of the truck bed, near the front and back of the tonneau cover.

Apply penetrating oil to the hinge bolts and allow it to sit for a few minutes.

Once you have located the hinge bolts, apply a few drops of penetrating oil to each bolt. This will help to loosen the bolts and make them easier to remove. Allow the penetrating oil to sit for a few minutes before continuing.

Remove the hinge bolts.

Once the penetrating oil has had time to work, you can begin to remove the hinge bolts. Use a ratchet and socket set to loosen the bolts. Be careful not to over-tighten the bolts, as this could damage the tonneau cover.

Remove the tonneau cover.

Once all of the hinge bolts have been removed, you can lift up the tonneau cover and remove it from the truck bed. Be careful not to damage the tonneau cover or the truck bed.

Reinstall the tonneau cover.

To reinstall the tonneau cover, simply reverse the steps above. Apply penetrating oil to the hinge bolts, tighten the bolts, and lower the tonneau cover into place.

.

Removing a hinged tonneau cover is a relatively simple task that can be completed in a few minutes. By following these steps, you can safely and easily remove your tonneau cover for cleaning, maintenance, or storage.

How do I remove a hinged tonneau cover?

1. Unlock the cover. Most hinged tonneau covers have a locking mechanism that prevents them from being opened from the outside. To unlock the cover, locate the release lever or button and press it.
2. Open the cover. Once the cover is unlocked, you can open it by lifting up on the front edge.
3. Remove the screws. There will be a series of screws that hold the cover in place. Use a screwdriver to remove these screws.
4. Lift off the cover. Once the screws are removed, you can lift off the cover. Be careful not to damage the weatherstripping or other components.

What tools do I need to remove a hinged tonneau cover?

You will need a screwdriver to remove the screws that hold the cover in place.

How long does it take to remove a hinged tonneau cover?

It should take about 10-15 minutes to remove a hinged tonneau cover.

What are the risks of removing a hinged tonneau cover?

There are a few risks associated with removing a hinged tonneau cover. First, you could damage the cover if you are not careful. Second, you could damage the weatherstripping or other components if you are not careful. Third, you could injure yourself if you are not careful.

How do I reinstall a hinged tonneau cover?

To reinstall a hinged tonneau cover, follow these steps:

1. Position the cover. Place the cover on the truck bed and make sure it is aligned properly.
2. Install the screws. Use a screwdriver to install the screws that hold the cover in place.
3. Lock the cover. Once the screws are installed, lock the cover by pressing the release lever or button.

What are the benefits of removing a hinged tonneau cover?

There are a few benefits to removing a hinged tonneau cover. First, it can improve visibility. Second, it can make it easier to access the truck bed. Third, it can reduce wind noise.

What are the drawbacks of removing a hinged tonneau cover?

There are a few drawbacks to removing a hinged tonneau cover. First, it can make your truck bed more vulnerable to theft. Second, it can make your truck bed more exposed to the elements. Third, it can make it more difficult to keep your truck bed clean.

In this blog post, we have discussed how to remove a hinged tonneau cover. We have provided step-by-step instructions, as well as tips and tricks to make the process easier. We hope that this information has been helpful, and that you are now able to remove your hinged tonneau cover with ease.

Here are some key takeaways from the blog post:

• Before you begin, make sure that you have the necessary tools and materials.
• The first step is to remove the screws that hold the cover in place.
• Once the screws are removed, you can lift the cover off of the truck bed.
• Be careful not to damage the paint or body of your truck.
• If you are having trouble removing the cover, you can use a lubricant to help loosen the screws.
• Once the cover is removed, you can clean the truck bed and reinstall the cover.

We hope that this blog post has been helpful. If you have any questions, please leave a comment below.