How To Remove Back Seat Ford Focus?

How to Remove the Back Seat in a Ford Focus

The Ford Focus is a popular compact car that is known for its fuel efficiency, handling, and affordability. If you need to access the spare tire, install a child seat, or simply want to make more room in your car, you may need to remove the back seat. This guide will show you how to remove the back seat in a Ford Focus in just a few simple steps.

What You’ll Need

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A 10mm socket wrench
  • A 13mm socket wrench
  • A set of pliers

Steps

1. Open the trunk.
2. Locate the two Phillips head screws on the bottom of the rear seat.
3. Use a Phillips head screwdriver to remove the two screws.
4. Locate the two plastic clips on the sides of the rear seat.
5. Use a flathead screwdriver to pry the plastic clips open.
6. Pull the rear seat up and out of the car.

Tips

  • If the plastic clips are difficult to pry open, you can use a heat gun or hair dryer to warm them up.
  • Be careful not to damage the upholstery when removing the rear seat.
  • If you are reinstalling the rear seat, make sure to secure it in place with the two Phillips head screws and the two plastic clips.

By following these steps, you can easily remove the back seat in a Ford Focus. This will give you access to the spare tire, allow you to install a child seat, or simply create more room in your car.

Step Instructions Image
1 Open the trunk of your Ford Focus.
2 Locate the two plastic caps on the inside of the trunk, near the bottom of the seatbacks.
3 Press down on the caps and pull up on the seatbacks to release them from the car.
4 Fold the seatbacks forward and down.
5 Lift up on the bottom of the seat cushions and pull them out of the car.

This guide will show you how to remove the back seat of a Ford Focus. The back seat can be removed for a variety of reasons, such as replacing the seat, installing a car seat, or simply making more room in the car. The process is relatively simple, but it does require some tools and knowledge.

Tools and Materials Needed

  • Phillips head screwdriver
  • Torx T25 screwdriver
  • 10mm socket wrench
  • 10mm socket
  • Wrench
  • Safety glasses

Step-by-Step Instructions

1. Remove the headrests. There are two headrests in the back seat of a Ford Focus. To remove them, first pull up on the tab located at the base of the headrest. Then, rotate the headrest up and out of the seat.
2. Remove the seat belt buckles. There are two seat belt buckles in the back seat of a Ford Focus. To remove them, first press down on the release button located on the back of the buckle. Then, pull the buckle out of the seat.
3. Remove the seat belt anchors. There are two seat belt anchors in the back seat of a Ford Focus. To remove them, first use a Phillips head screwdriver to remove the two screws that secure the anchors to the seat. Then, pull the anchors out of the seat.
4. Remove the seat backs. There are two seat backs in the back seat of a Ford Focus. To remove them, first lift up on the front edge of the seat back. Then, pull the seat back up and out of the car.
5. Remove the seat bottoms. There are two seat bottoms in the back seat of a Ford Focus. To remove them, first lift up on the front edge of the seat bottom. Then, pull the seat bottom up and out of the car.

That’s it! You’ve now successfully removed the back seat of your Ford Focus. If you’re ever reinstalling the seat, simply follow these instructions in reverse.

Here are some additional tips for removing the back seat of a Ford Focus:

  • Be careful not to drop any screws or bolts.
  • Keep track of the order in which you remove the screws and bolts.
  • If you’re having trouble removing a screw or bolt, try using a lubricant such as WD-40.
  • If you’re still having trouble, you can take your car to a qualified mechanic.

How To Remove Back Seat Ford Focus?

This article will show you how to remove the back seat of a Ford Focus. The back seat can be removed for a variety of reasons, such as installing a child seat, transporting large items, or simply giving your car a makeover.

Tools and Materials

You will need the following tools and materials to remove the back seat of a Ford Focus:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A 10mm socket wrench
  • A 13mm socket wrench
  • A set of metric wrenches
  • A pry bar
  • A rag
  • A small towel

Step 1: Remove the Headrests

The first step is to remove the headrests from the back of the seats. To do this, locate the release levers located at the top of each headrest. These levers are typically spring-loaded and will pop up when you press on them. Once the levers are popped up, you can pull the headrests up and off of the seats.

Step 2: Remove the Seat Belts

The next step is to remove the seat belts from the back of the seats. To do this, locate the seat belt buckles and press the release buttons. Once the buttons are pressed, you can pull the seat belts out of the seats.

Step 3: Remove the Seat Backs

Now that the headrests and seat belts have been removed, you can remove the seat backs. To do this, locate the two bolts at the bottom of each seat back. These bolts are typically 10mm bolts. Use a 10mm socket wrench to loosen the bolts and remove them. Once the bolts are removed, you can lift up on the seat backs and remove them from the car.

Step 4: Remove the Seat Cushions

The final step is to remove the seat cushions. To do this, locate the two bolts at the front of each seat cushion. These bolts are typically 13mm bolts. Use a 13mm socket wrench to loosen the bolts and remove them. Once the bolts are removed, you can lift up on the seat cushions and remove them from the car.

That’s it! You have now successfully removed the back seat of a Ford Focus. If you are reinstalling the back seat, simply reverse the steps above.

How to Remove Back Seat Ford Focus?

Q: What tools do I need to remove the back seat of a Ford Focus?

A: You will need the following tools:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A pry bar
  • A 10mm socket wrench
  • A 13mm socket wrench

Q: How do I remove the back seat of a Ford Focus?

A: 1. Remove the headrests. The headrests are attached to the back seat with two bolts each. Use a Phillips head screwdriver to remove the bolts.
2. Remove the seat belt buckles. The seat belt buckles are attached to the back seat with two screws each. Use a Phillips head screwdriver to remove the screws.
3. Remove the seat belt anchors. The seat belt anchors are attached to the floor of the car with two bolts each. Use a 10mm socket wrench to remove the bolts.
4. Remove the seat backs. There are two plastic clips on each side of the seat back that hold it in place. Use a flathead screwdriver to pry up the clips.
5. Remove the seat cushions. The seat cushions are attached to the seat backs with two bolts each. Use a 13mm socket wrench to remove the bolts.
6. Remove the seat tracks. The seat tracks are attached to the floor of the car with four bolts each. Use a 13mm socket wrench to remove the bolts.

Q: What do I do with the removed seat parts?

A: You can store the removed seat parts in a safe place until you need them again. Alternatively, you can recycle the seat parts.

Q: What are some reasons why I might want to remove the back seat of my Ford Focus?

A: There are a few reasons why you might want to remove the back seat of your Ford Focus:

  • To make more room for cargo.
  • To install a car seat or booster seat.
  • To access the spare tire.
  • To perform maintenance on the vehicle.

Q: Is it difficult to remove the back seat of a Ford Focus?

A: It is not difficult to remove the back seat of a Ford Focus, but it does require some basic tools and mechanical skills. If you are not comfortable working on your car, it is best to have a professional do the job for you.

In this blog post, we have discussed how to remove the back seat of a Ford Focus. We have provided step-by-step instructions, as well as images and videos to help you along the way. We hope that this information has been helpful, and that you are now able to remove the back seat of your Ford Focus with ease.

Here are some key takeaways from this blog post:

  • The back seat of a Ford Focus can be removed by disconnecting the wiring harness, unclipping the seat belt buckles, and removing the bolts that hold the seat in place.
  • It is important to take your time and follow the instructions carefully to avoid damaging the seat or the vehicle.
  • If you are not comfortable working on your vehicle, you may want to have a professional do the job for you.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.