How To Refoam Speaker?

How to Refoam a Speaker

Speakers are an essential part of any home entertainment system, but they can also be a major investment. If your speakers are starting to sound muffled or distorted, it may be time to refoam them. Refoaming is a relatively simple process that can be completed in a few hours with basic tools and materials. In this article, we’ll walk you through the steps of refoaming a speaker, so you can get your speakers sounding like new again.

We’ll start by discussing what speaker refoam is and why it’s important. Then, we’ll provide a step-by-step guide on how to refoam a speaker. Finally, we’ll offer some tips on how to prevent future speaker problems.

By the end of this article, you’ll have the knowledge and skills you need to refoam your speakers like a pro. So, if you’re ready to get started, let’s dive in!

Step	Instructions	Image
1	Remove the speaker grill from the speaker cabinet.
2	Locate the foam surround on the speaker cone.
3	Peel away the old foam surround from the speaker cone.
4	Apply a thin coat of adhesive to the speaker cone.
5	Press the new foam surround onto the speaker cone.
6	Allow the adhesive to dry completely.
7	Reattach the speaker grill to the speaker cabinet.

Speakers are an essential part of any audio system, but they can eventually wear out and need to be repaired or replaced. If you have a speaker with a torn or damaged foam surround, you can usually fix it yourself by refoaming the speaker. Refoaming a speaker is a relatively simple process, but it does require some basic tools and materials.

In this tutorial, we will show you how to refoam a speaker using replacement foam surrounds from Parts Express. We will also provide tips on how to choose the right replacement foam surrounds and how to properly install them.

Tools and Materials

The following tools and materials are required to refoam a speaker:

• Replacement foam surrounds
• Contact cement
• Safety glasses
• Gloves
• Pliers
• Screwdriver
• Heat gun
• Utility knife
• Rag

Preparing the Speaker

Before you can refoam a speaker, you need to first remove it from the cabinet and disconnect the wires. To do this, follow these steps:

1. Remove the screws that hold the speaker to the cabinet.
2. Disconnect the wires from the speaker terminals.
3. Carefully remove the speaker from the cabinet.

Once the speaker is removed from the cabinet, you can begin to remove the old foam surrounds. To do this, follow these steps:

1. Use a utility knife to carefully cut around the perimeter of the old foam surrounds.
2. Peel the old foam surrounds off of the speaker cone.
3. Clean the speaker cone with a rag.

Applying the New Foam Surrounds

Now that the old foam surrounds have been removed, you can begin to apply the new foam surrounds. To do this, follow these steps:

1. Apply a thin layer of contact cement to the inside of the new foam surrounds.
2. Carefully press the new foam surrounds onto the speaker cone.
3. Use a heat gun to warm the contact cement and allow it to dry.

Once the contact cement has dried, you can reinstall the speaker in the cabinet and reconnect the wires.

Refoaming a speaker is a relatively simple process, but it does require some basic tools and materials. By following the steps in this tutorial, you can easily repair a torn or damaged speaker and restore it to its former glory.

Here are some additional tips for refoaming a speaker:

• Choose the right replacement foam surrounds. The size and shape of the replacement foam surrounds must be a perfect match for the original foam surrounds.
• Apply the contact cement evenly. A thin layer of contact cement is all that is needed to hold the new foam surrounds in place.
• Be careful not to overheat the speaker cone. The heat gun should be set to a low setting and used only for a short period of time.
• Reinstall the speaker in the cabinet and reconnect the wires. Once the contact cement has dried, you can reinstall the speaker in the cabinet and reconnect the wires.

By following these tips, you can easily refoam a speaker and restore it to its former glory.

Applying the New Foam Surrounds

To apply the new foam surrounds, you will need:

• A thin coat of contact cement
• A new foam surround for each speaker
• A soft cloth
• A pair of scissors

1. Apply a thin coat of contact cement to the speaker cone.
2. Apply a thin coat of contact cement to the new foam surrounds.
3. Carefully position the new foam surrounds on the speaker cone.
4. Press the foam surrounds into place.

Be sure to work slowly and carefully to avoid damaging the speaker cone. Once the foam surrounds are in place, allow the contact cement to dry completely before using the speaker.

Reassembling the Speaker

To reassemble the speaker, you will need:

• The speaker cone
• The new foam surrounds
• The speaker basket
• The speaker magnet
• The speaker wires
• A screwdriver

1. Reattach the wires to the speaker.
2. Reinstall the speaker cone in the speaker basket.
3. Reattach the speaker magnet to the speaker cone.
4. Screw the speaker basket back onto the speaker.

Be sure to work slowly and carefully to avoid damaging the speaker. Once the speaker is reassembled, test it to make sure it is working properly.

Refoaming speakers is a relatively simple process that can be completed in a few hours. By following these steps, you can save money and extend the life of your speakers.

Here are some additional tips for refoaming speakers:

• Use a high-quality contact cement.
• Work in a well-ventilated area.
• Be careful not to get any contact cement on your skin or clothes.
• If you are not comfortable refoaming speakers yourself, you can take them to a professional.

Refoamed speakers will sound better and last longer than speakers with old or damaged foam surrounds. By following these steps, you can enjoy your speakers for many years to come.

How To Refoam Speaker?

What is refoaming a speaker?

Refoaming a speaker is the process of replacing the old foam surrounds on the speaker cones with new ones. This is necessary when the foam becomes worn or damaged, which can cause the speaker to sound muffled or distorted.

Why do I need to refoam my speakers?

There are a few reasons why you might need to refoam your speakers.

• The foam is worn or damaged. This is the most common reason for refoaming speakers. Over time, the foam can become brittle and crack, which can allow air to escape from the speaker cone. This can cause the speaker to sound muffled or distorted.
• The speaker is making a rattling noise. This can be caused by a loose or damaged foam surround. Refoaming the speaker can help to fix this problem.
• The speaker is not producing as much sound as it used to. This can be caused by a number of factors, including a worn or damaged foam surround. Refoaming the speaker can help to improve the sound quality.

How do I know if my speakers need to be refoamed?

There are a few things you can look for to determine if your speakers need to be refoamed.

• The speakers are making a rattling noise. This is a sign that the foam surround is loose or damaged.
• The speakers are not producing as much sound as they used to. This can be caused by a number of factors, including a worn or damaged foam surround.
• The speakers sound muffled or distorted. This is a sign that the foam surround is allowing air to escape from the speaker cone.

If you notice any of these signs, it’s a good idea to have your speakers refoamed.

How do I refoam my speakers?

Refoaming speakers is a relatively simple process, but it does require some basic tools and skills.

• Tools:
• Phillips head screwdriver
• Needle-nose pliers
• Heat gun
• Foam surround
• Adhesive

• Steps:

1. Remove the speaker grill from the speaker.
2. Remove the old foam surround from the speaker cone.
3. Apply a thin layer of adhesive to the speaker cone.
4. Carefully place the new foam surround on the speaker cone.
5. Use the heat gun to melt the adhesive and bond the foam surround to the speaker cone.
6. Allow the adhesive to cool completely.
7. Reattach the speaker grill to the speaker.

How much does it cost to refoam speakers?

The cost of refoaming speakers varies depending on the size and type of speaker. In general, you can expect to pay between $20 and $50 per speaker.

Where can I get my speakers refoamed?

You can have your speakers refoamed at a number of different places, including:

• A local audio shop. Most audio shops offer speaker refoam services.
• An online speaker refoam service. There are a number of online companies that offer speaker refoam services.
• Do it yourself. If you’re handy, you can also refoam your speakers yourself. There are a number of resources available online that can help you with this process.

What are the benefits of refoaming speakers?

Refoaming speakers can have a number of benefits, including:

• Improved sound quality. Refoamed speakers can produce clearer and more accurate sound.
• Increased durability. A new foam surround can help to protect the speaker cone from damage.
• Extended lifespan. Refoamed speakers can last longer than speakers with old or damaged foam surrounds.

Is it worth it to refoam speakers?

Whether or not it’s worth it to refoam speakers depends on a number of factors, including the cost of the speakers, the condition of the speakers, and your personal preferences. If you have expensive speakers that are in good condition, it’s usually worth it to have them refoamed. However, if you have inexpensive speakers that are in poor condition, it may not be worth the investment.

Ultimately, the decision of whether or not to refoam speakers is a personal one. You should weigh the costs and benefits to decide what’s best for you.

In this comprehensive guide, we have discussed how to refoam speakers in detail. We have covered everything from the tools and materials you will need to the steps involved in the process. We have also provided tips and tricks to help you get the best results.

We hope that this guide has been helpful and that you are now able to refoam your speakers like a pro. If you have any questions or need further assistance, please do not hesitate to contact us.

Here are some key takeaways from this guide:

• Refoaming speakers is a relatively simple process that can be completed in a few hours.
• The most important tools and materials you will need are a heat gun, a soldering iron, and a new speaker cone.
• The steps involved in the process are as follows:

1. Remove the old speaker cone from the frame.
2. Apply heat to the old adhesive to soften it.
3. Peel the old adhesive off of the frame.
4. Apply new adhesive to the frame.
5. Center the new speaker cone on the frame.
6. Press the new speaker cone into place.
7. Allow the adhesive to cure.

• To get the best results, follow the steps in this guide carefully and use high-quality materials.
• If you have any questions or need further assistance, please do not hesitate to contact us.