How To Put Soft Top Down On Jeep Wrangler 2-Door?

How to Put a Soft Top Down on a Jeep Wrangler 2-Door

The Jeep Wrangler is a popular SUV for its off-road capabilities and rugged good looks. One of the things that makes the Wrangler so unique is its removable soft top. This allows you to enjoy the open air while driving, or to quickly and easily put the top up when the weather turns bad.

In this article, we’ll show you how to put a soft top down on a Jeep Wrangler 2-door. We’ll provide step-by-step instructions, along with photos and videos to help you along the way.

So whether you’re new to the Wrangler or you’re just looking for a refresher, read on for all the information you need to know about putting a soft top down.

Step Instructions Image
1 Open the rear door and remove the soft top header.
2 Release the soft top latches and fold the top down.
3 Secure the soft top in place with the latches.

How to Put Soft Top Down on Jeep Wrangler 2-Door

This guide will walk you through the process of removing and reinstalling the soft top on a Jeep Wrangler 2-door. It’s a relatively simple process, but it does require some tools and a little bit of time.

Tools and Materials Needed

  • Soft top
  • Wrench
  • Screwdriver
  • Pliers
  • Penetrating oil
  • Rags

Step-by-Step Instructions

1. Remove the front door latches.

The front door latches are located on the inside of the door, near the top. To remove them, you’ll need to use a screwdriver to pry off the plastic caps. Once the caps are off, you can use a wrench to loosen the bolts that hold the latches in place.

2. Remove the rear door latches.

The rear door latches are located on the inside of the door, near the bottom. To remove them, you’ll need to use a screwdriver to pry off the plastic caps. Once the caps are off, you can use a wrench to loosen the bolts that hold the latches in place.

3. Remove the rear window.

The rear window is held in place by a series of clips. To remove it, you’ll need to use a screwdriver to pry up the clips around the edge of the window. Once all of the clips are removed, you can lift the window out of the frame.

4. Remove the soft top frame.

The soft top frame is held in place by a series of bolts. To remove it, you’ll need to use a wrench to loosen the bolts. Once all of the bolts are loosened, you can lift the frame up and out of the vehicle.

5. Fold the soft top down.

The soft top can now be folded down. To do this, you’ll need to fold the front and rear panels down over the windshield and rear window, respectively. Once the panels are folded down, you can secure them in place with the latches.

6. Secure the soft top in place.

The soft top can now be secured in place. To do this, you’ll need to use the pliers to tighten the bolts that hold the latches in place. You should also use the penetrating oil to lubricate the latches so that they operate smoothly.

That’s it! You’ve now successfully removed and reinstalled the soft top on your Jeep Wrangler 2-door. If you have any questions, please consult your vehicle’s owner’s manual.

Additional Tips

  • If you’re having trouble removing the soft top, you can try using a heat gun to loosen the adhesive.
  • Be careful not to damage the soft top when you’re removing it.
  • Make sure to tighten the bolts securely when you’re reinstalling the soft top.
  • Lubricate the latches with penetrating oil so that they operate smoothly.

How To Put Soft Top Down On Jeep Wrangler 2-Door

Putting the soft top down on a Jeep Wrangler 2-Door is a relatively simple process, but there are a few steps involved. By following these steps, you can easily lower the soft top and enjoy the open-air experience of your Jeep.

1. Remove the front header bows.

The front header bows are two metal bars that support the front of the soft top. To remove them, first locate the two bolts that secure each bow to the windshield frame. Using a 10mm socket wrench, loosen and remove the bolts. Once the bolts are removed, the bows can be lifted up and out of the windshield frame.

2. Remove the rear header bows.

The rear header bows are two metal bars that support the rear of the soft top. To remove them, first locate the two bolts that secure each bow to the body of the Jeep. Using a 10mm socket wrench, loosen and remove the bolts. Once the bolts are removed, the bows can be lifted up and out of the body of the Jeep.

3. Fold the soft top down.

With the front and rear header bows removed, the soft top can now be folded down. To do this, first locate the two latches on the front of the soft top. These latches are located just above the windshield. Using a flathead screwdriver, pry open the latches. Once the latches are open, the front of the soft top can be folded down.

Next, locate the two latches on the rear of the soft top. These latches are located just above the rear window. Using a flathead screwdriver, pry open the latches. Once the latches are open, the rear of the soft top can be folded down.

4. Secure the soft top.

Once the soft top is folded down, it can be secured in place using the two straps that are located at the front and rear of the soft top. To secure the straps, simply wrap them around the front and rear header bows and then tighten them using the buckles.

5. Put the header bows back in place.

Once the soft top is secured, the header bows can be put back in place. To do this, simply slide the bows into the windshield frame and body of the Jeep. Once the bows are in place, secure them using the bolts that you removed earlier.

6. Enjoy the open-air experience!

With the soft top down, you can now enjoy the open-air experience of your Jeep. Whether you’re driving down the highway or parked at the beach, the soft top will allow you to feel the wind in your hair and the sun on your face.

Troubleshooting

If you’re having trouble putting the soft top down on your Jeep Wrangler 2-Door, there are a few things you can check.

  • The soft top is stuck. If the soft top is stuck, it may be because the latches are not properly engaged. To fix this, try prying open the latches with a flathead screwdriver. If the latches are still stuck, you may need to lubricate them with a silicone spray.
  • The soft top is not sealing properly. If the soft top is not sealing properly, it may be because the weatherstripping is damaged or missing. To fix this, you can try replacing the weatherstripping. If the weatherstripping is not damaged or missing, you may need to adjust the tension of the soft top.
  • The soft top is leaking. If the soft top is leaking, it may be because the seals are damaged or missing. To fix this, you can try replacing the seals. If the seals are not damaged or missing, you may need to adjust the tension of the soft top.

Tips and Tricks

To keep your soft top in good condition and to avoid problems, here are a few tips and tricks:

  • Keep the soft top clean and in good condition. Wash the soft top regularly with a mild detergent and water. Avoid using harsh chemicals or cleaners, as these can damage the soft top.
  • Lubricate the soft top frame regularly. To prevent the soft top frame from rusting, lubricate it with a silicone spray every few months.
  • Store the soft top in a cool, dry place when not in use. When you’re not using the soft top, store it in a cool, dry place. This will help to prevent the soft top from becoming damaged or moldy.

By following these tips and tricks, you can keep your soft top in good condition and enjoy the open-air experience of your Jeep Wrangler 2-

How do I put the soft top down on a Jeep Wrangler 2-Door?

1. Unlock the top by pressing the button on the driver’s side door.
2. Open the tailgate and fold down the rear seat.
3. Unlatch the front bow by pulling on the red tab.
4. Lift up on the front of the top and pull it forward until it is over the windshield.
5. Unlatch the rear bow by pulling on the red tab.
6. Lift up on the rear of the top and pull it forward until it is over the windshield.
7. Secure the top in place by latching the front and rear bows.
8. Close the tailgate.

What are the different steps involved in putting the soft top up on a Jeep Wrangler 2-Door?

1. Unlock the top by pressing the button on the driver’s side door.
2. Open the tailgate and fold down the rear seat.
3. Unlatch the front bow by pulling on the red tab.
4. Lift up on the front of the top and pull it back until it is over the windshield.
5. Unlatch the rear bow by pulling on the red tab.
6. Lift up on the rear of the top and pull it back until it is over the windshield.
7. Secure the top in place by latching the front and rear bows.
8. Close the tailgate.

What are some common problems people have when putting the soft top up or down on a Jeep Wrangler 2-Door?

  • The top is not latching properly. Make sure that all of the latches are securely fastened. If a latch is not latching properly, it may be bent or damaged. You can try to bend the latch back into place or replace it if necessary.
  • The top is not fitting properly. Make sure that the top is installed correctly. The top should be snug against the body of the Jeep. If the top is not fitting properly, it may be misaligned or damaged. You can try to realign the top or replace it if necessary.
  • The top is leaking. Make sure that the top is sealed properly. The top should have a waterproof seal around the edges. If the top is leaking, it may have a damaged seal. You can try to repair the seal or replace the top if necessary.

What are some tips for putting the soft top up or down on a Jeep Wrangler 2-Door?

  • Take your time and be careful. Putting the soft top up or down can be a bit tricky, so it’s important to take your time and be careful. If you rush, you’re more likely to make a mistake.
  • Follow the instructions carefully. The owner’s manual for your Jeep Wrangler 2-Door will have instructions for putting the soft top up or down. Make sure to follow these instructions carefully.
  • Use the right tools. There are a few tools that can make putting the soft top up or down easier. These tools include a ratchet strap, a screwdriver, and a pair of pliers.
  • Ask for help if you need it. If you’re having trouble putting the soft top up or down, don’t be afraid to ask for help. A friend or family member can help you hold the top in place or make sure that it’s latched properly.

    Putting the soft top down on a Jeep Wrangler 2-Door is a relatively simple task, but there are a few steps involved. By following the steps in this guide, you can easily and safely remove the soft top from your Jeep Wrangler 2-Door.

Here are the key takeaways from this guide:

  • Before you begin, make sure that the vehicle is parked on a level surface and that the engine is turned off.
  • Remove the front and rear header bows by unscrewing the bolts that hold them in place.
  • Fold the soft top forward and unhook the latches at the front and rear of the vehicle.
  • Carefully lower the soft top down and fold it up.
  • Reattach the latches at the front and rear of the vehicle.
  • Reinstall the header bows by screwing the bolts back in place.

By following these steps, you can easily and safely remove the soft top from your Jeep Wrangler 2-Door.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.