How To Program Sony Dvd Remote To Tv Rmt-D197A?

How to Program a Sony DVD Remote to a TV (RMT-D197A)

Your Sony DVD remote can control your TV, but it may not be programmed to do so by default. If you’re having trouble using your DVD remote to control your TV, you may need to program it. This guide will show you how to program a Sony DVD remote to a TV using the RMT-D197A model.

Steps

1. Turn on your TV and DVD player.
2. Press and hold the TV button on the DVD remote.
3. While holding the TV button, press the Power button on the DVD remote.
4. Release both buttons.
5. The TV’s power button should blink twice, indicating that the remote is now programmed.

Now you can use your Sony DVD remote to control your TV. To turn on the TV, press the Power button on the remote. To change the channel, press the CH + or – buttons. To adjust the volume, press the Vol + or – buttons.

Troubleshooting

If you’re having trouble programming your Sony DVD remote to your TV, here are a few things you can try:

• Make sure that your TV and DVD player are turned on.
• Make sure that the TV and DVD player are both in the same input mode.
• Try reprogramming the remote.
• If you’re still having trouble, contact Sony customer support for help.

Programming a Sony DVD remote to a TV is a simple process that can be completed in a few minutes. By following the steps in this guide, you can easily get your remote up and running so you can enjoy your DVD movies without having to use two remotes.

Step	Action	Explanation
1	Turn on the TV and DVD player	Make sure both devices are turned on and in working order.
2	Press and hold the “TV” button on the DVD remote	This will put the remote in TV mode.
3	Enter the code for your TV brand	You can find this code in the table below.
4	Press the “Enter” button on the DVD remote	This will program the remote to your TV.
5	Test the remote	Try using the remote to control your TV. If it doesn’t work, try reprogramming the remote or entering a different code.

Table of TV Brands and Codes

| Brand | Code |
|—|—|
| Samsung | 0148 |
| LG | 0376 |
| Sony | 1002 |
| Panasonic | 0768 |
| Toshiba | 1005 |
| Vizio | 1001 |
| Hisense | 0463 |
| Sharp | 0069 |
| TCL | 0120 |
| Insignia | 0407 |
| Westinghouse | 0413 |

This guide will show you how to program a Sony DVD remote control to a TV. The steps are the same for most Sony DVD remote controls, but may vary slightly depending on the model of your TV.

Prerequisites

• Sony DVD remote control
• TV that supports the Sony DVD remote control
• A clear line of sight between the remote control and the TV

Steps

1. Turn on the TV and DVD player.
2. Press and hold the “TV” and “Power” buttons on the Sony DVD remote control for about 5 seconds.
3. The TV screen will display a message asking you to enter the code for your TV.
4. Use the number keys on the Sony DVD remote control to enter the code for your TV.
5. Press the “Enter” button on the Sony DVD remote control.
6. The TV screen will display a message confirming that the remote control has been programmed.

Troubleshooting

If you are having trouble programming the Sony DVD remote control to your TV, here are a few things to check:

• Make sure that you are using the correct code for your TV. You can find the code for your TV in the user manual or online.
• Make sure that the TV and DVD player are turned on and that there is a clear line of sight between the remote control and the TV.
• Try resetting the Sony DVD remote control. To do this, remove the batteries from the remote control and wait for about 10 seconds. Then, reinsert the batteries and try programming the remote control again.

If you are still having trouble programming the Sony DVD remote control to your TV, you can contact Sony customer support for assistance.

By following these steps, you can easily program a Sony DVD remote control to a TV. This will allow you to control your TV with the Sony DVD remote control, making it easier to watch movies, TV shows, and other content.

How to Program Sony DVD Remote to TV RMT-D197A?

This guide will show you how to program your Sony DVD remote to your TV.

Step 1: Make sure your TV and DVD player are turned on.

Step 2: Press and hold the TV button on the remote control until the TV indicator light starts to blink.

Step 3: Enter the code for your TV brand.

The code for your TV brand can be found in the table below.

| TV Brand | Code |
|—|—|
| Samsung | 000 |
| LG | 111 |
| Panasonic | 222 |
| Sony | 333 |
| Toshiba | 444 |
| Vizio | 555 |
| Sharp | 666 |
| Philips | 777 |
| Hisense | 888 |
| TCL | 999 |

Step 4: Press the Enter button on the remote control.

The TV indicator light will stop blinking and the remote control will be programmed to your TV.

Troubleshooting

If the remote control is not working, try the following:

• Make sure that the batteries in the remote control are fresh.
• Try programming the remote control again.
• If you are still having trouble, contact Sony customer support for assistance.

How to Use Sony DVD Remote to TV RMT-D197A?

Once you have programmed your Sony DVD remote to your TV, you can use it to control the following functions:

• Power on/off
• Volume up/down
• Channel up/down
• Mute
• Play/pause
• Fast-forward/rewind
• Skip tracks
• Search
• Menu
• Return
• Exit

To use the remote control, simply point it at the TV and press the corresponding button.

Troubleshooting

If the remote control is not working, try the following:

• Make sure that the batteries in the remote control are fresh.
• Try programming the remote control again.
• If you are still having trouble, contact Sony customer support for assistance.

How to Change Batteries in Sony DVD Remote RMT-D197A

To change the batteries in your Sony DVD remote, follow these steps:

1. Locate the battery compartment on the back of the remote.
2. Use a coin to pry open the battery compartment.
3. Remove the old batteries.
4. Insert two new AAA batteries, making sure to match the positive and negative terminals.
5. Close the battery compartment.

Troubleshooting

If the remote control is not working after you have changed the batteries, try the following:

• Make sure that the batteries are inserted correctly.
• Try programming the remote control again.
• If you are still having trouble, contact Sony customer support for assistance.

This guide has shown you how to program your Sony DVD remote to your TV, how to use the remote control, and how to change the batteries. For more information, please visit the Sony website.

How do I program my Sony DVD remote to my TV?

1. Turn on your TV and DVD player.
2. Press and hold the TV button on the DVD remote until the TV indicator light blinks twice.
3. Enter the code for your TV brand by pressing the number keys on the DVD remote. The code list is below.
4. Press the Enter button on the DVD remote. The TV indicator light will turn off.

Here is the code list for popular TV brands:

• Samsung: 0149, 0155, 0173, 0653, 0677, 0679, 0737, 0759, 0805, 0809, 0827, 0863, 0901, 0937, 0945, 0953, 0965, 0997, 1005, 1009, 1013, 1069, 1077, 1089, 1093, 1101, 1113, 1127, 1133, 1145, 1153, 1165, 1177, 1197, 1205, 1209, 1213, 1269, 1277, 1289, 1293, 1301, 1313, 1327, 1333, 1345, 1353, 1365, 1377, 1397, 1405, 1409, 1413, 1469, 1477, 1489, 1493, 1501, 1513, 1527, 1533, 1545, 1553, 1565, 1577, 1597, 1605, 1609, 1613, 1669, 1677, 1689, 1693, 1701, 1713, 1727, 1733, 1745, 1753, 1765, 1777, 1797, 1805, 1809, 1813, 1869, 1877, 1889, 1893, 1901, 1913, 1927, 1933, 1945, 1953, 1965, 1977, 1997, 2005, 2009, 2013, 2069, 2077, 2089, 2093, 2101, 2113, 2127, 2133, 2145, 2153, 2165, 2177, 2197, 2205, 2209, 2213, 2269, 2277, 2289, 2293, 2301, 2313, 2327, 2333, 2345, 2353, 2365, 2377, 2397, 2405, 2409, 2413, 2469, 2477, 2489, 2493, 2501, 2513, 2527, 2533, 2545, 2553, 2565, 2577, 2597, 2605, 2609, 2613,

  this guide has provided you with all the necessary information on how to program your Sony DVD remote to your TV. By following the steps outlined in this guide, you will be able to control your DVD player and TV with the same remote, making your entertainment experience more convenient.

Here are some key takeaways from this guide:

• The first step is to ensure that your TV and DVD player are both turned on.
• Next, you need to find the TV button on your Sony DVD remote.
• Once you have found the TV button, press and hold it down until the light on the remote flashes twice.
• Now, you need to use the arrow keys on the remote to select the input that your DVD player is connected to.
• Finally, press the Enter button on the remote to complete the programming process.

By following these steps, you will be able to control your DVD player and TV with the same remote. This will make your entertainment experience more convenient and enjoyable.