How To Make A Ak Fully Auto?

How to Make an AK-47 Fully Automatic

The AK-47 is one of the most iconic and widely-used firearms in the world. It’s simple, reliable, and deadly. But what if you want to make your AK-47 fully automatic? Is it possible? And if so, how do you do it?

In this article, we’ll take a look at the process of converting an AK-47 from semi-automatic to fully automatic. We’ll discuss the legality of this process, the tools and materials you’ll need, and the steps involved in the conversion.

We’ll also provide some safety tips, as well as a warning about the potential consequences of converting your AK-47 to full auto.

So if you’re interested in learning how to make an AK-47 fully automatic, read on!

Step Instructions Tools
1 Acquire a semi-automatic AK-47 rifle. – AK-47 rifle
2 Remove the rear sight assembly. – AK-47 rear sight assembly removal tool
3 Drill a hole in the rear of the receiver. – Drill bit
4 Install a disconnector spring and disconnector. – Disconnector spring
5 Install a selector switch. – Selector switch
6 Test the rifle. – Ammunition

This article will provide instructions on how to make an AK-47 fully automatic. This process is illegal in most countries and is not advised. However, it is still possible to do with the right tools and knowledge.

Parts Required

The following parts are required to make an AK-47 fully automatic:

  • AK-47 receiver
  • AK-47 barrel
  • AK-47 bolt carrier
  • AK-47 trigger group
  • AK-47 selector switch
  • AK-47 magazine
  • AK-47 firing pin
  • AK-47 hammer
  • AK-47 disconnector
  • AK-47 sear
  • AK-47 spring

Modifications Required

The following modifications are required to make an AK-47 fully automatic:

  • Drill a hole in the receiver for the auto sear.
  • Mill out the selector switch to allow for full-auto fire.
  • Install the auto sear and disconnector.
  • Install the spring and sear.

Drilling the Hole in the Receiver

The first step is to drill a hole in the receiver for the auto sear. This hole should be located in the rear of the receiver, just below the selector switch. The hole should be approximately 0.125 inches in diameter and 0.5 inches deep.

Milling out the Selector Switch

The next step is to mill out the selector switch to allow for full-auto fire. This can be done with a Dremel tool or a milling machine. The selector switch should be milled out so that it can be moved to the “F” position, which will allow for full-auto fire.

Installing the Auto Sear and Disconnector

The next step is to install the auto sear and disconnector. The auto sear is a small metal part that prevents the hammer from striking the firing pin unless the trigger is pulled. The disconnector is a small metal part that prevents the trigger from being pulled more than once while the hammer is cocked.

The auto sear and disconnector can be installed by following the instructions that came with the parts.

Installing the Spring and Sear

The final step is to install the spring and sear. The spring is a small metal spring that helps to keep the hammer cocked. The sear is a small metal part that holds the hammer in the cocked position.

The spring and sear can be installed by following the instructions that came with the parts.

Once you have completed all of the steps, your AK-47 will be fully automatic. It is important to note that making an AK-47 fully automatic is illegal in most countries and is not advised. However, if you are willing to take the risk, this article provides the instructions on how to do it.

3. Testing

Once you have completed the construction of your fully automatic firearm, it is important to test it to ensure that it is functioning properly. Here are a few things to keep in mind when testing your firearm:

  • Use a safe location. Test your firearm in a safe location, such as a shooting range or a remote area. Make sure that there are no people or animals in the area where you are testing your firearm.
  • Wear eye protection and hearing protection. Always wear eye protection and hearing protection when handling firearms. This will help to protect you from injury in the event of a malfunction.
  • Start with a low-power ammunition. When you are first testing your firearm, start with a low-power ammunition. This will help to reduce the risk of a malfunction.
  • Fire the firearm in short bursts. When you are first testing your firearm, fire it in short bursts. This will help to prevent the firearm from overheating.
  • Monitor the firearm for signs of malfunction. Monitor the firearm for signs of malfunction, such as excessive smoke, excessive noise, or a failure to cycle properly. If you notice any signs of malfunction, stop firing the firearm and have it inspected by a qualified gunsmith.

Once you have tested your firearm and you are satisfied that it is functioning properly, you can begin to use it for its intended purpose.

4. Disclaimer

This content is for informational purposes only. It is not intended to be a guide for building a fully automatic firearm. Building a fully automatic firearm is illegal in most countries. If you are interested in building a fully automatic firearm, please consult with a qualified professional.

How to Make an AK Fully Auto?

Q: Is it legal to make an AK fully automatic?

A: No, it is illegal to manufacture or possess a fully automatic weapon without a Federal Firearms License (FFL).

Q: What are the steps involved in making an AK fully automatic?

A: There are many different methods for converting an AK to full-auto, but all of them involve modifying the receiver in a way that is not legal without an FFL.

Q: What are the risks of making an AK fully automatic?

A: There are many risks associated with making an AK fully automatic, including:

  • Criminal prosecution.
  • Civil liability.
  • Personal injury or death.

Q: Is there a safe way to make an AK fully automatic?

A: No, there is no safe way to make an AK fully automatic without an FFL.

Q: What should I do if I am interested in making an AK fully automatic?

A: If you are interested in making an AK fully automatic, you should contact a qualified firearms attorney.

Q: What are the penalties for making an AK fully automatic without an FFL?

A: The penalties for making an AK fully automatic without an FFL can include:

  • Up to 10 years in prison.
  • A fine of up to $250,000.
  • The forfeiture of the weapon and any other property used in the crime.

Q: How can I legally own a fully automatic weapon?

The only legal way to own a fully automatic weapon is to have a Federal Firearms License (FFL) and to purchase the weapon from a licensed dealer.

there are a few key takeaways from this article. First, it is important to understand that making an AK-47 fully automatic is illegal in the United States. Second, there are a number of safety risks associated with making any firearm modifications, and these risks should be carefully considered before proceeding. Third, even if you are able to successfully make an AK-47 fully automatic, it is still a dangerous weapon that should be used with caution.

If you are considering making any modifications to your firearm, it is important to consult with a qualified gunsmith. They can help you understand the risks involved and make sure that the modifications are done correctly.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.