How To Fix Oe Code On Kenmore Washer?

How to Fix OE Code on Kenmore Washer

Your Kenmore washer is displaying the OE code, and you’re not sure what it means or how to fix it. Don’t worry, you’re not alone. This is a common problem, and it’s usually easy to fix.

In this article, we’ll explain what the OE code means and how to troubleshoot and fix the problem. We’ll also provide some tips on how to prevent the OE code from happening again.

So if you’re ready to learn how to fix the OE code on your Kenmore washer, keep reading!

Step Action Explanation
1 Check the water supply to the washer. Make sure that the water supply hoses are connected properly and that there is no blockage in the hoses.
2 Check the drain hose. Make sure that the drain hose is not kinked or blocked.
3 Clean the lint filter. The lint filter can become clogged with lint, which can prevent the washer from draining properly.
4 Reset the washer. Press and hold the power button for 10 seconds to reset the washer.
5 Call a technician. If you have tried all of the above steps and the Oe code is still appearing, you may need to call a technician to repair the washer.

What is the OE Code on a Kenmore Washer?

The OE code on a Kenmore washer is an error code that indicates that the washer has detected a problem with the water inlet valve. This can be caused by a number of things, including a blocked water line, a faulty water inlet valve, or a problem with the control board.

When the OE code is displayed, the washer will not fill with water. If you try to start the washer, it will cycle through the rinse and spin cycles without filling with water.

What Causes the OE Code on a Kenmore Washer?

There are a number of things that can cause the OE code on a Kenmore washer. Some of the most common causes include:

  • A blocked water line: If the water line to the washer is blocked, it will not be able to fill with water. This can be caused by a kink in the line, a clog in the filter, or a foreign object blocking the line.
  • A faulty water inlet valve: The water inlet valve is responsible for sending water from the water line to the washer. If the valve is faulty, it may not be able to open properly or it may not be able to close properly. This can prevent the washer from filling with water.
  • A problem with the control board: The control board is responsible for sending signals to the water inlet valve. If the control board is faulty, it may not be able to send the correct signals to the valve, which can prevent the washer from filling with water.

How to Fix the OE Code on a Kenmore Washer

If you are getting the OE code on your Kenmore washer, there are a few things you can check to try to fix the problem.

  • Check the water line: First, check the water line to make sure that it is not blocked. Look for any kinks or bends in the line, and check the filter for any clogs. If you find a blockage, clear it out and try starting the washer again.
  • Check the water inlet valve: If the water line is clear, the next thing to check is the water inlet valve. You can check the valve by turning the water supply to the washer on and off. If the valve is faulty, it will not open or close properly. You can replace the valve yourself or you can call a qualified technician to do it for you.
  • Check the control board: If the water line and the water inlet valve are both working properly, the next thing to check is the control board. You can check the control board by using a multimeter to test the voltage at the connector. If the voltage is not correct, the control board may be faulty. You can replace the control board yourself or you can call a qualified technician to do it for you.

The OE code on a Kenmore washer can be caused by a number of things, including a blocked water line, a faulty water inlet valve, or a problem with the control board. If you are getting the OE code, you can try to fix the problem yourself by checking the water line, the water inlet valve, and the control board. If you are unable to fix the problem yourself, you can call a qualified technician to help you.

How to Fix the OE Code on a Kenmore Washer

The OE code on a Kenmore washer is an error code that indicates that the washer has detected a problem with the water level. This can be caused by a number of things, including a clogged drain hose, a faulty water inlet valve, or a problem with the water pressure.

To fix the OE code on a Kenmore washer, you will need to troubleshoot the problem to determine the cause. Once you have identified the cause, you can take steps to fix it.

Troubleshooting the OE Code on a Kenmore Washer

The following are some steps you can take to troubleshoot the OE code on a Kenmore washer:

1. Check the drain hose. The drain hose can become clogged with lint, dirt, or other debris. This can prevent the water from draining properly, which can trigger the OE code. To check the drain hose, remove the hose from the back of the washer and inspect it for any obstructions. If you find any obstructions, remove them and reattach the hose.
2. Check the water inlet valve. The water inlet valve can become faulty and fail to open properly. This can prevent the washer from getting enough water, which can also trigger the OE code. To check the water inlet valve, turn off the water supply to the washer and remove the hose from the valve. Then, use a multimeter to test the valve for continuity. If the valve does not have continuity, it will need to be replaced.
3. Check the water pressure. The water pressure to the washer may be too low. This can prevent the washer from getting enough water, which can also trigger the OE code. To check the water pressure, turn on the water supply to the washer and attach a pressure gauge to the water line. The water pressure should be between 40 and 80 psi. If the water pressure is too low, you will need to contact your local water provider to increase the pressure.

Fixing the OE Code on a Kenmore Washer

Once you have identified the cause of the OE code, you can take steps to fix it.

  • If the drain hose is clogged, remove the obstruction and reattach the hose.
  • If the water inlet valve is faulty, replace the valve.
  • If the water pressure is too low, contact your local water provider to increase the pressure.

The OE code on a Kenmore washer can be a frustrating problem, but it is usually easy to fix. By following the steps in this guide, you can troubleshoot the problem and fix the OE code quickly and easily.

Troubleshooting Tips for the OE Code on a Kenmore Washer

In addition to the steps outlined above, there are a few other troubleshooting tips that you can try if you are having trouble fixing the OE code on your Kenmore washer.

  • Try resetting the washer. Sometimes, a simple reset can fix the OE code. To reset the washer, turn it off and unplug it from the outlet. Wait for a few minutes, then plug the washer back in and turn it on.
  • Try cleaning the lint filter. A clogged lint filter can prevent the washer from draining properly, which can trigger the OE code. To clean the lint filter, remove it from the washer and rinse it under warm water.
  • Try checking the water level. The water level in the washer may be too high or too low. To check the water level, look at the water level indicator on the front of the washer. If the water level is too high, you will need to drain some of the water from the washer. If the water level is too low, you will need to add more water to the washer.
  • Try checking the hoses. The hoses on the washer may be kinked or damaged. This can prevent the washer from getting enough water, which can also trigger the OE code. To check the hoses, inspect them for any kinks or damage. If you find any kinks or damage, you will need to replace the hoses.

By following these troubleshooting tips, you can hopefully fix the OE code on your Kenmore washer quickly and easily.

If you are still having trouble fixing the OE code on your Kenmore washer, you may need to contact a qualified appliance repair technician for help.

Q: What does the OE code on a Kenmore washer mean?

A: The OE code on a Kenmore washer means that the water level sensor is not working properly. This can cause the washer to not fill with water or to fill too much water.

Q: How do I fix the OE code on my Kenmore washer?

A: To fix the OE code on your Kenmore washer, you will need to:

1. Disconnect the power to the washer.
2. Remove the access panel on the front of the washer.
3. Locate the water level sensor. It is a small, black, plastic box with a wire connected to it.
4. Check the connection between the water level sensor and the control board. Make sure that the wire is securely connected to both the sensor and the control board.
5. If the connection is secure, replace the water level sensor.
6. Reconnect the power to the washer and test it. The OE code should be gone.

Q: What if I can’t find the water level sensor or the connection is not secure?

A: If you can’t find the water level sensor or the connection is not secure, you can contact a Kenmore authorized repair center for help.

Q: What other problems could cause the OE code on my Kenmore washer?

A: The OE code could also be caused by a problem with the control board, the water inlet valve, or the drain pump. If you have tried the steps above and the OE code is still there, you may need to have the washer diagnosed by a qualified technician.

Q: How can I prevent the OE code from happening again?

A: You can prevent the OE code from happening again by:

1. Cleaning the water inlet filter regularly.
2. Making sure that the water pressure is within the recommended range.
3. Inspecting the water level sensor for damage or wear.
4. Replacing the water level sensor if it is damaged or worn.

the OE code on a Kenmore washer can be caused by a variety of issues, including a faulty water inlet valve, a clogged drain hose, or a problem with the control board. To troubleshoot the issue, you will need to check the water inlet valve, the drain hose, and the control board. If you are unable to fix the issue yourself, you will need to contact a qualified repair technician.

Here are some key takeaways to remember:

  • The OE code on a Kenmore washer can be caused by a variety of issues.
  • To troubleshoot the issue, you will need to check the water inlet valve, the drain hose, and the control board.
  • If you are unable to fix the issue yourself, you will need to contact a qualified repair technician.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.