How To Fix Fl Code On Whirlpool Washer?

How to Fix the FL Code on a Whirlpool Washer

Your Whirlpool washer is displaying the FL code? Don’t panic! This is a common problem that can be easily fixed. In this article, we will walk you through the steps to troubleshoot and fix the FL code on your Whirlpool washer.

We’ll start by explaining what the FL code means and what causes it. Then, we’ll give you step-by-step instructions on how to fix the problem. Finally, we’ll provide some tips on how to prevent the FL code from happening again.

So, if you’re seeing the FL code on your Whirlpool washer, don’t worry – we’re here to help!

Step Action Explanation
1 Unplug the washer from the wall outlet. This will power off the washer and prevent any further damage.
2 Check the water supply to the washer. Make sure that the water supply is turned on and that there is no kink or blockage in the hose.
3 Check the drain hose for clogs. Remove the drain hose from the back of the washer and inspect it for any clogs.
4 Clean the lint filter. The lint filter can become clogged with lint, which can prevent the washer from draining properly.
5 Reset the washer. Press and hold the start/pause button for 5 seconds to reset the washer.
6 If the FL code persists, call a qualified appliance repair technician. The FL code can be caused by a more serious problem that requires professional repair.

What Does the FL Code Mean?

The FL code on a Whirlpool washer means that the drain hose is clogged. This can prevent the washer from draining properly, which can lead to a number of problems, including:

  • Water overflowing from the washer
  • The washer not spinning properly
  • The washer not rinsing or washing clothes effectively

If you see the FL code on your Whirlpool washer, it’s important to fix the problem as soon as possible to avoid further damage to your washer and your clothes.

What Causes the FL Code?

There are a few things that can cause the FL code on a Whirlpool washer, including:

  • A clogged drain hose
  • A kinked drain hose
  • A blocked drain
  • A faulty drain pump
  • A clogged lint filter

To determine the cause of the FL code, you’ll need to inspect the drain hose, the drain, and the drain pump. You’ll also need to clean the lint filter.

How to Check the Drain Hose

The first step is to check the drain hose to see if it’s clogged. To do this, you’ll need to:

1. Turn off the water supply to the washer.
2. Unplug the washer.
3. Remove the drain hose from the back of the washer.
4. Inspect the drain hose for any obstructions.

If you find any obstructions, you can remove them using a pair of pliers. Once you’ve removed the obstructions, reconnect the drain hose to the back of the washer and turn the water supply back on.

How to Check the Drain

If the drain hose is clear, the next step is to check the drain itself. To do this, you’ll need to:

1. Remove the drain hose from the back of the washer.
2. Place the end of the drain hose in a bucket or sink.
3. Turn on the washer and let it drain.

If the water drains properly, the drain is clear. If the water doesn’t drain properly, the drain may be blocked. You can try to clear the drain using a plunger or a drain snake. If you’re unable to clear the drain, you may need to call a plumber.

How to Check the Drain Pump

If the drain hose and the drain are clear, the next step is to check the drain pump. To do this, you’ll need to:

1. Turn off the water supply to the washer.
2. Unplug the washer.
3. Remove the back panel of the washer.
4. Locate the drain pump.
5. Inspect the drain pump for any damage or obstructions.

If you find any damage or obstructions, you’ll need to repair or replace the drain pump. You can find replacement drain pumps at most home improvement stores.

How to Clean the Lint Filter

The final step is to clean the lint filter. To do this, you’ll need to:

1. Open the lid of the washer.
2. Locate the lint filter.
3. Remove the lint filter.
4. Rinse the lint filter under warm water.
5. Dry the lint filter completely.
6. Reinsert the lint filter.

Once you’ve cleaned the lint filter, you can try running the washer again. If the FL code still appears, you may need to call a technician to diagnose and repair the problem.

The FL code on a Whirlpool washer can be caused by a number of problems, including a clogged drain hose, a kinked drain hose, a blocked drain, a faulty drain pump, or a clogged lint filter. To fix the problem, you’ll need to inspect the drain hose, the drain, the drain pump, and the lint filter. If you’re unable to fix the problem yourself, you may need to call a technician.

How to Fix the FL Code

The FL code on a Whirlpool washer indicates that the washer has detected a fault with the water level sensor. This can be caused by a number of things, including a blocked hose, a faulty sensor, or a problem with the control board.

To fix the FL code, you will need to troubleshoot the problem and identify the cause. Here are the steps involved:

1. Check the water hoses. The first thing you should do is check the water hoses to make sure that they are not blocked. To do this, disconnect the hoses from the back of the washer and inspect them for any kinks or obstructions. If you find any blockages, clear them out and reconnect the hoses.
2. Check the water level sensor. The water level sensor is located at the bottom of the washer tub. To check the sensor, remove the detergent dispenser and look for a small, black box. This is the water level sensor. Use a multimeter to check the resistance of the sensor. The resistance should be between 100 and 200 ohms. If the resistance is outside of this range, the sensor is faulty and will need to be replaced.
3. Check the control board. The control board is responsible for sending signals to the water level sensor. If the control board is faulty, it may not be sending the correct signals to the sensor, which could cause the FL code to be displayed. To check the control board, you will need to use a multimeter to test the voltage at the connector. The voltage should be between 5 and 12 volts. If the voltage is not within this range, the control board is faulty and will need to be replaced.

Once you have identified the cause of the FL code, you can fix the problem and get your washer back up and running.

When to Call a Repair Technician

If you are not comfortable troubleshooting and repairing your own washer, you may want to consider calling a repair technician. A repair technician can diagnose the problem and fix it quickly and efficiently.

Here are some signs that you should call a repair technician:

  • You are not comfortable troubleshooting and repairing your own washer.
  • You have tried to fix the problem yourself, but you have been unsuccessful.
  • The problem is causing your washer to leak water or not work properly.
  • The problem is making your washer unsafe to use.

If you have any of these concerns, you should call a repair technician to come and take a look at your washer.

The FL code on a Whirlpool washer can be a frustrating problem, but it is usually easy to fix. By following the steps in this guide, you can troubleshoot the problem and get your washer back up and running in no time.

If you are not comfortable troubleshooting and repairing your own washer, you may want to consider calling a repair technician. A repair technician can diagnose the problem and fix it quickly and efficiently.

Q: What does the FL code on a Whirlpool washer mean?

A: The FL code on a Whirlpool washer means that the water level sensor is not working properly. This can cause the washer to not fill with enough water, which can lead to problems with washing your clothes.

Q: How can I fix the FL code on my Whirlpool washer?

A: There are a few things you can check to try to fix the FL code on your Whirlpool washer. First, check the water level sensor to make sure it is properly connected and that there is no debris blocking it. If the sensor is connected properly and there is no debris, you may need to replace the sensor. You can also try resetting the washer by turning it off and then back on. If these steps do not work, you may need to contact a qualified appliance repair technician.

Q: What are some other common problems with Whirlpool washers?

A: In addition to the FL code, there are a few other common problems with Whirlpool washers. These include:

  • The washer not draining properly
  • The washer not spinning properly
  • The washer making a loud noise
  • The washer leaking water

If you are experiencing any of these problems, you should first try to troubleshoot the issue yourself. If you are unable to fix the problem, you may need to contact a qualified appliance repair technician.

Q: How can I prevent problems with my Whirlpool washer?

A: There are a few things you can do to help prevent problems with your Whirlpool washer. These include:

  • Using the correct detergent and water level for your load of laundry
  • Cleaning the lint filter regularly
  • Inspecting the hoses for leaks regularly
  • Troubleshooting any problems as soon as they occur

By following these tips, you can help keep your Whirlpool washer running smoothly for years to come.

the FL code on a Whirlpool washer can be caused by a variety of issues, including a faulty lid switch, a clogged drain, or a problem with the water inlet valve. To fix the problem, you will need to identify the cause of the error code and take the necessary steps to correct it. If you are unable to fix the problem yourself, you can always contact a qualified appliance repair technician for assistance.

Here are some key takeaways to remember:

  • The FL code on a Whirlpool washer can be caused by a variety of issues, including a faulty lid switch, a clogged drain, or a problem with the water inlet valve.
  • To fix the problem, you will need to identify the cause of the error code and take the necessary steps to correct it.
  • If you are unable to fix the problem yourself, you can always contact a qualified appliance repair technician for assistance.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.