How To Clean The Kenmore Elite Washer?

How to Clean the Kenmore Elite Washer

Your Kenmore Elite washer is a workhorse, keeping your clothes clean and fresh day after day. But even the best washers need a little TLC from time to time. By following these simple steps, you can keep your Kenmore Elite washer running smoothly and efficiently for years to come.

Step 1: Clean the exterior of the washer

The exterior of your Kenmore Elite washer is easy to clean. Simply wipe it down with a damp cloth and mild detergent. Be sure to avoid using harsh chemicals, as these can damage the finish.

Step 2: Clean the lint filter

The lint filter traps lint and other debris from your clothes, preventing it from clogging up the drain. It’s important to clean the lint filter regularly to keep your washer running smoothly. To clean the lint filter, remove it from the washer and rinse it under warm water. Be sure to dry the lint filter completely before reinstalling it.

Step 3: Clean the detergent dispenser

The detergent dispenser can become clogged with detergent residue and other debris over time. To clean the detergent dispenser, remove it from the washer and rinse it under warm water. You can also use a small brush to loosen any stubborn debris. Be sure to dry the detergent dispenser completely before reinstalling it.

Step 4: Clean the drain hose

The drain hose can also become clogged with lint and other debris. To clean the drain hose, disconnect it from the back of the washer and run a hose from the drain valve to a bucket. Turn on the washer and let it run until the water stops draining. Reconnect the drain hose and run a cycle of hot water with bleach to disinfect the hose.

Step 5: Clean the inside of the washer

To clean the inside of the washer, run a cycle of hot water with bleach. This will help to kill any bacteria or mold that may be growing inside the washer. Be sure to read the owner’s manual for your specific model of washer to learn more about how to clean it properly.

By following these simple steps, you can keep your Kenmore Elite washer running smoothly and efficiently for years to come.

Step	Instructions	Image
1	Turn off the washer and unplug it from the wall.
2	Open the detergent dispenser and remove any detergent or softener pods.
3	Pour a cup of white vinegar into the detergent dispenser.
4	Run the washer on a hot water cycle with no clothes.
5	Once the cycle is complete, open the door and allow the washer to air dry.

Your Kenmore Elite washer is a valuable investment, and it’s important to keep it clean in order to maintain its performance and extend its lifespan. By following these simple steps, you can clean your Kenmore Elite washer and keep it looking and working its best.

Step 1: Prepare Your Washer

Before you can clean your Kenmore Elite washer, you need to prepare it by turning it off and unplugging it from the outlet. You should also remove the detergent dispenser and any other accessories from the washer. Finally, wipe down the exterior of the washer with a damp cloth to remove any dirt or debris.

Step 2: Clean the Drum

The drum is the most important part of your Kenmore Elite washer, and it’s important to clean it regularly to prevent buildup of dirt, grime, and soap scum. To clean the drum, you will need:

• A cup of white vinegar
• A cup of baking soda

To begin, pour a cup of white vinegar into the empty drum. Then, add a cup of baking soda to the drum. Next, turn on the washer and set it to the “Normal” cycle with hot water. Allow the cycle to complete, and then rinse the drum thoroughly with cold water.

Step 3: Clean the Dispenser Drawer

The detergent dispenser drawer is another important part of your Kenmore Elite washer, and it’s important to clean it regularly to prevent buildup of detergent residue. To clean the dispenser drawer, you will need:

• A small brush
• A cup of warm water
• A mild detergent

To begin, remove the detergent drawer from the washer. Then, use a small brush to scrub the inside of the drawer to remove any detergent residue. Next, fill a cup with warm water and add a small amount of mild detergent. Use the solution to rinse the drawer thoroughly. Finally, dry the drawer with a towel and replace it in the washer.

Step 4: Clean the Agitator

The agitator is the part of the washer that helps to agitate the clothes and water during the wash cycle. It’s important to clean the agitator regularly to prevent buildup of dirt, grime, and soap scum. To clean the agitator, you will need:

• A toothbrush
• A cup of warm water
• A mild detergent

To begin, remove the agitator from the washer. Then, use a toothbrush to scrub the agitator to remove any dirt, grime, or soap scum. Next, fill a cup with warm water and add a small amount of mild detergent. Use the solution to rinse the agitator thoroughly. Finally, dry the agitator with a towel and replace it in the washer.

Step 5: Clean the Door Gasket

The door gasket is the rubber seal around the door of the washer. It’s important to clean the door gasket regularly to prevent buildup of dirt, grime, and soap scum. To clean the door gasket, you will need:

• A damp cloth
• A mild detergent

To begin, dampen a cloth with warm water and add a small amount of mild detergent. Then, use the cloth to wipe down the door gasket. Be sure to clean all of the nooks and crannies. Finally, rinse the door gasket with warm water and dry it with a towel.

By following these simple steps, you can clean your Kenmore Elite washer and keep it looking and working its best. By keeping your washer clean, you can help to extend its lifespan and prevent costly repairs.

Step 1: Clean the Exterior of the Washer

To clean the exterior of the Kenmore Elite washer, you will need:

• A mild detergent
• A damp cloth
• A dry cloth

1. Wipe down the exterior of the washer with a damp cloth. Be sure to clean all surfaces, including the top, sides, and back of the washer.
2. Rinse the cloth with clean water and wipe down the exterior of the washer again. This will remove any soap residue.
3. Dry the exterior of the washer with a dry cloth. This will help to prevent water spots from forming.

Step 2: Clean the Interior of the Washer

To clean the interior of the Kenmore Elite washer, you will need:

• A mild detergent
• A hose
• A bucket
• A scrub brush

1. Empty the washer of all clothes and water.
2. Turn on the washer and fill it with hot water. Add a cup of mild detergent to the water.
3. Let the washer run for a cycle. This will help to loosen any dirt or grime that is stuck to the inside of the washer.
4. Turn off the washer and drain the water.
5. Use a hose to rinse the inside of the washer. Be sure to rinse all surfaces, including the agitator and the drain hose.
6. Use a scrub brush to clean any stubborn dirt or grime. Be sure to clean all surfaces, including the agitator and the drain hose.
7. Rinse the washer thoroughly with clean water.
8. Dry the inside of the washer with a dry cloth. This will help to prevent water spots from forming.

Step 3: Clean the Dispenser Drawer

To clean the dispenser drawer of the Kenmore Elite washer, you will need:

• A mild detergent
• A damp cloth
• A toothbrush

1. Remove the detergent dispenser from the washer.
2. Rinse the dispenser drawer under warm water.
3. Use a toothbrush to clean the dispenser drawer and remove any built-up residue.
4. Rinse the dispenser drawer thoroughly with clean water.
5. Dry the dispenser drawer with a dry cloth.

Step 4: Clean the Door Gasket

To clean the door gasket of the Kenmore Elite washer, you will need:

• A damp cloth
• A toothbrush

1. Use a damp cloth to wipe down the door gasket.
2. Use a toothbrush to clean any built-up residue in the door gasket.
3. Rinse the door gasket thoroughly with clean water.

Tips for Cleaning Your Kenmore Elite Washer

• Clean the washer regularly to prevent build-up of dirt and grime.
• Use a mild detergent and warm water to clean the washer.
• Do not use harsh chemicals or abrasive cleaners on the washer.
• Avoid using too much detergent, as this can cause build-up and damage to the washer.
• Rinse the washer thoroughly after each use.

By following these tips, you can keep your Kenmore Elite washer clean and functioning properly for years to come.

How often should I clean my Kenmore Elite washer?

Answer: It is recommended to clean your Kenmore Elite washer every 3-4 months. However, if you use your washer frequently or if you have hard water, you may need to clean it more often.

What do I need to clean my Kenmore Elite washer?

Answer: You will need the following items to clean your Kenmore Elite washer:

• 1 cup of white vinegar
• 1 cup of baking soda
• A clean cloth or sponge
• A bucket of hot water

How do I clean the inside of my Kenmore Elite washer?

Answer: To clean the inside of your Kenmore Elite washer, follow these steps:

1. Turn off the washer and unplug it from the outlet.
2. Open the door to the washer and remove the detergent dispenser.
3. Pour 1 cup of white vinegar into the detergent dispenser.
4. Pour 1 cup of baking soda into the bottom of the washer.
5. Close the door to the washer and turn it on to the “Normal” cycle.
6. Allow the washer to complete the cycle.
7. Once the cycle is complete, open the door to the washer and remove the detergent dispenser.
8. Rinse the detergent dispenser with warm water.
9. Wipe down the inside of the washer with a clean cloth or sponge.
10. Reattach the detergent dispenser and close the door to the washer.

How do I clean the outside of my Kenmore Elite washer?

Answer: To clean the outside of your Kenmore Elite washer, follow these steps:

1. Use a damp cloth to wipe down the exterior of the washer.
2. Use a small brush to clean around the door gasket and the dispenser drawer.
3. Dry the washer with a clean towel.

What should I do if my Kenmore Elite washer is not draining?

Answer: If your Kenmore Elite washer is not draining, there are a few things you can check:

• Make sure that the drain hose is not kinked or clogged.
• Check the filter to see if it is clogged.
• Clean the lint trap.
• Reset the washer.

If you have checked all of these things and your washer is still not draining, you may need to call a technician for assistance.

What should I do if my Kenmore Elite washer is not filling with water?

Answer: If your Kenmore Elite washer is not filling with water, there are a few things you can check:

• Make sure that the water supply to the washer is turned on.
• Check the water inlet hoses to make sure they are not kinked or damaged.
• Check the water filter to see if it is clogged.
• Reset the washer.

If you have checked all of these things and your washer is still not filling with water, you may need to call a technician for assistance.

cleaning your Kenmore Elite washer is a simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can keep your washer running efficiently and prevent damage to your clothes.

Here are the key takeaways:

• Clean the exterior of your washer with a mild detergent and water.
• Clean the lint filter after each use.
• Clean the detergent dispenser every month.
• Clean the agitator and tub once a year.
• Deep clean the washer once a year.

By following these simple steps, you can keep your Kenmore Elite washer in good condition for years to come.