How To Change Water Filter In Whirlpool Side-By-Side Refrigerator?

How to Change a Water Filter in a Whirlpool Side-By-Side Refrigerator

Your Whirlpool side-by-side refrigerator has a water filter that helps to remove impurities from your water supply, keeping your water clean and fresh-tasting. But did you know that your water filter needs to be replaced regularly? If you don’t replace your water filter on a regular basis, you could be putting your health at risk.

In this article, we will show you how to change the water filter in your Whirlpool side-by-side refrigerator. We’ll provide step-by-step instructions and images to help you along the way. So if you’re ready to learn how to change your water filter, read on!

Step Instructions Image
1 Locate the water filter housing. It is typically located on the inside of the refrigerator door, near the bottom.
2 Press the release button on the water filter housing and pull the filter straight out.
3 Insert the new water filter into the housing. Make sure that the filter is oriented correctly.
4 Push the release button on the water filter housing and turn the filter clockwise until it is locked in place.
5 Run a glass of water through the water dispenser to flush out any air from the new filter.

How To Change Water Filter In Whirlpool Side-By-Side Refrigerator?

Tools and Materials Needed

  • Replacement water filter for your Whirlpool refrigerator (check the model number on the back of the refrigerator to find the correct filter)
  • Phillips head screwdriver
  • Paper towels
  • Bucket

Step-by-Step Instructions

1. Turn off the water supply to the refrigerator. The water supply valve is usually located on the back of the refrigerator, near the bottom. Turn the valve clockwise to turn off the water supply.
2. Remove the old filter. The old filter is located in the water filter housing, which is usually located at the bottom of the refrigerator, behind the kickplate. To remove the old filter, grasp the handle on the top of the filter and pull it straight out.
3. Clean the water filter housing. Use a paper towel to wipe down the inside of the water filter housing. This will help to prevent any contaminants from getting into the new filter.
4. Install the new filter. Insert the new filter into the water filter housing. Make sure that the filter is properly seated in the housing.
5. Turn on the water supply to the refrigerator. Turn the water supply valve counterclockwise to turn on the water supply.
6. Test the new filter. Run a glass of water from the refrigerator and check for any leaks. If there are no leaks, the new filter has been installed correctly.

Tips:

  • Be sure to read the instructions that came with your new water filter.
  • If you are not sure how to change the water filter in your Whirlpool refrigerator, you can contact a qualified technician for assistance.
  • Changing the water filter in your Whirlpool refrigerator is a simple task that can be completed in a few minutes. By following these steps, you can ensure that your refrigerator is properly filtered and that you are drinking clean, fresh water.

Changing the water filter in your Whirlpool refrigerator is an important task that should be done regularly. By following these steps, you can ensure that your refrigerator is properly filtered and that you are drinking clean, fresh water.

How to Change Water Filter in Whirlpool Side-by-Side Refrigerator

Your Whirlpool side-by-side refrigerator has a water filter that removes impurities from your water supply, such as sediment, chlorine, and other harmful substances. Changing the filter regularly is important to ensure that you have clean, fresh water for drinking, cooking, and other purposes.

Changing the water filter in your Whirlpool side-by-side refrigerator is a relatively simple task that can be completed in just a few minutes. Here are the steps involved:

  1. Locate the water filter housing. The water filter housing is typically located in the back of the refrigerator, near the bottom. It is a cylindrical-shaped container with a blue cap.
  2. Turn off the water supply to the refrigerator. The water supply valve is typically located near the water filter housing. Turn the valve clockwise to stop the flow of water.
  3. Remove the old water filter. Grasp the blue cap of the water filter housing and turn it counterclockwise to remove it. The old filter will come out with the cap.
  4. Insert the new water filter. Take the new water filter out of its packaging and insert it into the water filter housing. Make sure that the filter is properly seated in the housing.
  5. Turn on the water supply to the refrigerator. Turn the water supply valve counterclockwise to resume the flow of water.
  6. Replace the water filter cap. Turn the blue cap of the water filter housing clockwise to secure it in place.

That’s it! You have now successfully changed the water filter in your Whirlpool side-by-side refrigerator.

Troubleshooting

If you are having trouble changing the water filter in your Whirlpool side-by-side refrigerator, here are a few troubleshooting tips:

  • Make sure that you have turned off the water supply to the refrigerator before removing the old filter.
  • Make sure that you are using the correct type of water filter for your refrigerator.
  • Make sure that the new filter is properly seated in the water filter housing.
  • If you are still having trouble, contact a qualified technician for assistance.

Additional Tips

Here are a few additional tips for maintaining your Whirlpool side-by-side refrigerator:

  • Change the water filter regularly, according to the manufacturer’s instructions.
  • Clean the water filter housing regularly to prevent the build-up of sediment and other impurities.
  • Keep the refrigerator door closed as much as possible to reduce the amount of warm air that enters the refrigerator.
  • Defrost the refrigerator regularly to prevent the build-up of ice.

By following these tips, you can help to keep your Whirlpool side-by-side refrigerator running smoothly and efficiently.

Changing the water filter in your Whirlpool side-by-side refrigerator is a simple task that can be completed in just a few minutes. By following the steps in this guide, you can ensure that you have clean, fresh water for drinking, cooking, and other purposes.

For more information on maintaining your Whirlpool side-by-side refrigerator, please consult the owner’s manual.

How do I know when to change my Whirlpool side-by-side refrigerator water filter?

Your Whirlpool side-by-side refrigerator water filter should be changed every 6 months or 500 gallons, whichever comes first. You can check the filter status by looking at the indicator light on the front of the refrigerator. The light will turn red when it’s time to change the filter.

How do I change the water filter in my Whirlpool side-by-side refrigerator?

1. Turn off the water supply to the refrigerator. This is usually located at the back of the refrigerator, near the bottom.
2. Locate the water filter housing. It is usually located at the back of the refrigerator, near the bottom.
3. Remove the old filter. To do this, twist the filter counterclockwise until it comes loose.
4. Insert the new filter. Make sure that the filter is inserted all the way into the housing.
5. Turn on the water supply to the refrigerator.
6. Run a glass of water to flush the new filter.

What happens if I don’t change my Whirlpool side-by-side refrigerator water filter?

If you don’t change your Whirlpool side-by-side refrigerator water filter, your water may become cloudy or taste bad. You may also notice a decrease in the flow of water from your refrigerator.

Can I use a different brand of water filter in my Whirlpool side-by-side refrigerator?

Yes, you can use a different brand of water filter in your Whirlpool side-by-side refrigerator. However, it is important to make sure that the filter is compatible with your refrigerator.

Where can I buy a replacement water filter for my Whirlpool side-by-side refrigerator?

You can buy a replacement water filter for your Whirlpool side-by-side refrigerator at most major retailers. You can also purchase a filter directly from Whirlpool.

Changing the water filter in your Whirlpool side-by-side refrigerator is a simple task that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your refrigerator is properly filtered and that you are drinking clean, fresh water.

Here are the key takeaways from this guide:

  • The water filter in your Whirlpool side-by-side refrigerator is located behind the kickplate at the bottom of the refrigerator.
  • To change the filter, you will need to remove the kickplate, unscrew the old filter, and screw in the new filter.
  • The water filter should be changed every 6 months or 500 gallons of water, whichever comes first.
  • By following these steps, you can ensure that your refrigerator is properly filtered and that you are drinking clean, fresh water.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.