How To Change Time On Armitron Watch Wr330Ft?

How to Change Time on Armitron Watch WR330FT

Your Armitron watch WR330FT is a stylish and functional timepiece that can be worn for any occasion. However, if you’re not sure how to change the time, you may be missing out on some of its features. This guide will walk you through the process of changing the time on your Armitron watch WR330FT, so you can keep it accurate and stylish.

Steps to Change the Time on Your Armitron Watch WR330FT

1. Pull out the crown. The crown is the small, button-like protrusion on the side of your watch. To change the time, you’ll need to pull it out to the first position.
2. Turn the crown. Once the crown is pulled out, you can use it to turn the time. Turn the crown clockwise to move the hour hand forward and counterclockwise to move it backward.
3. Push the crown back in. When you’re finished changing the time, push the crown back in to the original position.

That’s it! You’ve now successfully changed the time on your Armitron watch WR330FT.

Step Action Explanation
1 Press and hold the Mode button until the seconds start to flash. This will put the watch in time-setting mode.
2 Use the Hour and Minute buttons to set the time. The Hour button moves the hour in one-hour increments, and the Minute button moves the minute in one-minute increments.
3 Press the Mode button to exit time-setting mode. The seconds will stop flashing, and the watch will return to normal mode.

What You Will Need

To change the time on your Armitron WR330FT watch, you will need:

  • A small, pointed object, such as a toothpick or paper clip
  • The current time

Steps to Change the Time

1. Turn the watch over and locate the time setting button. The time setting button is a small, recessed button located on the back of the watch.
2. Press and hold the time setting button until the watch’s display begins to flash.
3. Use the pointed object to rotate the watch’s hands to the desired time. The hour hand can be moved by rotating the crown clockwise, and the minute hand can be moved by rotating the crown counterclockwise.
4. Release the time setting button. The watch’s display will stop flashing and the new time will be set.

Changing the time on your Armitron WR330FT watch is a simple process that can be completed in just a few minutes. By following the steps outlined above, you can easily keep your watch accurate and up-to-date.

Here are some additional tips for changing the time on your Armitron WR330FT watch:

  • If the watch’s hands are not moving, you may need to reset the watch’s battery. To do this, remove the back cover of the watch and locate the battery. The battery is a small, round, flat object that is usually located in the center of the watch. Use a small, pointed object to pry the battery out of the watch. Once the battery is removed, replace it with a new battery.
  • If the watch’s display is not working properly, you may need to reset the watch’s settings. To do this, hold down the time setting button for about 10 seconds. The watch’s display will reset and the watch will return to its default settings.
  • If you are having trouble changing the time on your watch, you can contact Armitron customer service for assistance. Armitron customer service can be reached by phone at 1-800-426-7466 or by email at [email protected]

How to Change Time on Armitron Watch WR330FT

The Armitron WR330FT is a digital watch that features a stopwatch, alarm, and calendar. It is also water-resistant up to 330 feet. The watch is easy to operate, and changing the time is a simple process.

To change the time on your Armitron WR330FT, follow these steps:

  1. Press and hold the Mode button until the Hour indicator flashes.
  2. Use the UP and DOWN buttons to adjust the hour.
  3. Press the Mode button again to save your changes.

To change the minute, follow these steps:

  1. Press and hold the Mode button until the Minute indicator flashes.
  2. Use the UP and DOWN buttons to adjust the minute.
  3. Press the Mode button again to save your changes.

To change the date, follow these steps:

  1. Press and hold the Mode button until the Date indicator flashes.
  2. Use the UP and DOWN buttons to adjust the date.
  3. Press the Mode button again to save your changes.

To change the time zone, follow these steps:

  1. Press and hold the Mode button until the DST indicator flashes.
  2. Use the UP and DOWN buttons to toggle the DST setting.
  3. Press the Mode button again to save your changes.

For more information on how to operate your Armitron WR330FT, please consult the owner’s manual.

Troubleshooting

If you are having trouble changing the time on your Armitron WR330FT, there are a few things you can check:

  • Make sure that the watch is not in stopwatch mode.
  • Make sure that the battery is not low.
  • Try restarting the watch by pressing and holding the Mode button for about 10 seconds.

If you are still having trouble, you can contact Armitron customer service for assistance.

Additional Resources

How do I change the time on my Armitron WR330FT watch?

1. Press and hold the top button until the second hand starts to move.
2. Use the bottom button to adjust the hour.
3. Press the top button to move to the minute.
4. Use the bottom button to adjust the minute.
5. Press the top button to save your changes.

What if I accidentally change the time while I’m wearing the watch?

Don’t worry, you can easily reset the time by following these steps:

1. Press and hold the top button until the second hand starts to move.
2. Press and hold the bottom button until the second hand stops.
3. Release both buttons.

The time will be reset to 12:00 AM.

What if my watch stops working?

There are a few things that could cause your watch to stop working. Here are a few things to check:

  • Is the battery low? If the battery is low, your watch will stop working. You can replace the battery by following the instructions in the owner’s manual.
  • Is the watch magnetized? If your watch is magnetized, it can stop working. You can try demagnetizing the watch by following the instructions in the owner’s manual.
  • Is the watch damaged? If your watch is damaged, it may need to be repaired or replaced.

If you’re not sure what’s wrong with your watch, you can take it to a watchmaker for a diagnosis.

How do I keep my watch in good condition?

Here are a few tips for keeping your watch in good condition:

  • Don’t wear your watch in the shower or while swimming. Water can damage the watch’s movement.
  • Don’t expose your watch to extreme heat or cold. Extreme temperatures can damage the watch’s components.
  • Don’t drop your watch. A drop can damage the watch’s case or movement.
  • Have your watch serviced regularly. A regular service will help to keep your watch running smoothly.

By following these tips, you can help to keep your watch in good condition for years to come.

In this tutorial, we have shown you how to change the time on your Armitron watch WR330FT. We hope that this has been a helpful guide for you. If you have any other questions or concerns, please do not hesitate to contact us.

Here are some key takeaways from this tutorial:

  • To change the time on your Armitron watch WR330FT, you will need to use the crown.
  • The crown is located on the right side of the watch, and it is used to set the time, date, and alarm.
  • To set the time, turn the crown clockwise until the desired time is displayed.
  • To set the date, turn the crown counterclockwise until the desired date is displayed.
  • To set the alarm, turn the crown clockwise until the desired alarm time is displayed.
  • To turn the alarm on or off, press the button located at the 2 o’clock position.
  • To snooze the alarm, press the button located at the 4 o’clock position.
  • To turn the watch off, press and hold the button located at the 8 o’clock position.

We hope that you find this information helpful. Thank you for reading!

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.