How To Change String On Stihl Weed Eater?

How to Change String on a Stihl Weed Eater

Your Stihl weed eater is a powerful tool that can help you keep your yard looking its best. But if the string breaks, it can be a pain to replace. Luckily, changing the string on a Stihl weed eater is a relatively simple task that can be completed in just a few minutes.

In this article, we’ll walk you through the process of changing the string on your Stihl weed eater. We’ll provide step-by-step instructions and images to help you along the way. So whether you’re a seasoned pro or a first-time user, read on for all the information you need to know about changing the string on your Stihl weed eater.

Step Instructions Image
1 Turn off the weed eater and disconnect the spark plug wire.
2 Remove the old string by pulling it out of the head.
3 Cut a new piece of string to the correct length.
4 Thread the new string through the head and tighten it.
5 Reconnect the spark plug wire and turn on the weed eater.

How to Change String on a Stihl Weed Eater

Stihl weed eaters are a popular choice for homeowners and professionals alike. They are powerful and efficient, and they can handle a variety of tasks. However, one of the most common problems with weed eaters is that the string eventually wears out and needs to be replaced.

Changing the string on a Stihl weed eater is a relatively simple task, but it is important to do it correctly in order to avoid damaging the machine. In this guide, we will walk you through the process of changing the string on a Stihl weed eater.

Tools and Materials Needed

  • Stihl weed eater
  • Replacement string
  • Pliers
  • Tape measure
  • Safety glasses

Steps to Change String

1. Turn off the weed eater and disconnect the spark plug wire. This will prevent the engine from starting accidentally while you are working on it.
2. Remove the old string. There are two ways to do this.

  • If your weed eater has a bump head, you can simply push the bump head down and pull the old string out.
  • If your weed eater has a spool, you will need to use a pair of pliers to unscrew the spool.

3. Measure the new string. The new string should be the same length as the old string. You can measure the old string using a tape measure.
4. Thread the new string onto the spool. The new string should be threaded onto the spool in the same direction as the old string.
5. Reattach the spool to the weed eater. If your weed eater has a bump head, simply push the bump head down until it clicks into place. If your weed eater has a spool, screw the spool back onto the weed eater.
6. Reconnect the spark plug wire.
7. Test the weed eater. Turn on the weed eater and let it run for a few seconds. Make sure that the string is spinning properly.

Changing the string on a Stihl weed eater is a relatively simple task, but it is important to do it correctly in order to avoid damaging the machine. By following the steps in this guide, you can easily change the string on your Stihl weed eater and keep it running smoothly.

Additional Tips

  • If you are not comfortable working on your own lawn equipment, you can take your Stihl weed eater to a qualified repair shop.
  • Be sure to wear safety glasses when changing the string on your weed eater. The string can break and fly off, and it can cause serious eye injuries.
  • Keep the area around your work area clean and free of debris. This will help to prevent the string from becoming tangled.
  • Store your Stihl weed eater in a safe place when it is not in use. This will help to protect it from damage.

How To Change String On Stihl Weed Eater?

Stihl weed eaters are some of the most popular models on the market, and for good reason. They’re powerful, durable, and easy to use. But even the best weed eaters need to be maintained, and one of the most important maintenance tasks is changing the string.

Changing the string on a Stihl weed eater is a relatively simple task, but it’s important to do it correctly to avoid damaging your machine. Here’s a step-by-step guide on how to change the string on a Stihl weed eater:

1. Turn off the weed eater and disconnect the spark plug wire. This is an important safety precaution to take before you begin any maintenance on your weed eater.
2. Remove the old string from the weed eater. There are two ways to do this. The first way is to use the string trimmer’s built-in string cutter. To do this, simply hold the weed eater upside down and turn the trimmer on. The string cutter will automatically cut the old string.

The second way to remove the old string is to use a pair of pliers. To do this, grasp the end of the old string with the pliers and pull it out of the weed eater.

3. Thread the new string through the weed eater. The new string should be the same length as the old string. To thread the new string through the weed eater, start by inserting one end of the string into the hole in the spool. Then, feed the string through the hole in the weed eater’s head.

Once the string is threaded through the weed eater, you’ll need to tie a knot in the end of the string. To do this, wrap the end of the string around the spool twice and then tie a knot.

4. Reattach the spark plug wire. Once you’ve tied the knot in the new string, you can reattach the spark plug wire to the weed eater.

5. Test the weed eater. Once you’ve reattached the spark plug wire, you can test the weed eater to make sure it’s working properly. To do this, simply turn on the weed eater and let it run for a few seconds. The weed eater should be able to cut through grass and weeds without any problems.

Changing the string on a Stihl weed eater is a relatively simple task, but it’s important to do it correctly to avoid damaging your machine. By following these steps, you can easily change the string on your Stihl weed eater and keep it running in top condition.

Tools and Materials Needed

To change the string on a Stihl weed eater, you will need the following tools and materials:

  • Stihl weed eater
  • Pliers
  • New string
  • String trimmer’s built-in string cutter

Step-by-Step Instructions

1. Turn off the weed eater and disconnect the spark plug wire. This is an important safety precaution to take before you begin any maintenance on your weed eater.
2. Remove the old string from the weed eater. There are two ways to do this. The first way is to use the string trimmer’s built-in string cutter. To do this, simply hold the weed eater upside down and turn the trimmer on. The string cutter will automatically cut the old string.

The second way to remove the old string is to use a pair of pliers. To do this, grasp the end of the old string with the pliers and pull it out of the weed eater.

3. Thread the new string through the weed eater. The new string should be the same length as the old string. To thread the new string through the weed eater, start by inserting one end of the string into the hole in the spool. Then, feed the string through the hole in the weed eater’s head.

Once the string is threaded through the weed eater, you’ll need to tie a knot in the end of the string. To do this, wrap the end of the string around the spool twice and then tie a knot.

4. Reattach the spark plug wire. Once you’ve tied the knot in the new string, you can reattach the spark plug wire to the weed eater.

5. Test the weed eater. Once you’ve reattached the spark plug wire, you can test the weed eater to make sure it’s working properly. To do this, simply turn on the weed eater and let it run for a few seconds. The weed eater should be able to cut through grass and weeds without any problems.

How to Change String on Stihl Weed Eater

Q: What tools do I need to change the string on my Stihl weed eater?

A: You will need the following tools:

  • A Phillips head screwdriver
  • A pair of pliers
  • A new spool of weed eater string

Q: How do I remove the old string from my Stihl weed eater?

A: 1. Turn off the weed eater and disconnect the spark plug wire.
2. Locate the string head on the weed eater. It is a small, round cap located near the bottom of the trimmer.
3. Use the Phillips head screwdriver to remove the screws that hold the string head in place.
4. Remove the string head from the weed eater.
5. Use the pliers to remove the old string from the string head.

Q: How do I install the new string on my Stihl weed eater?

A: 1. Thread the new string through the eyelets in the string head.
2. Make sure that the string is the same length on both sides.
3. Pull the string tight and secure it in place with the screws that you removed earlier.
4. Reattach the spark plug wire and turn on the weed eater.

Q: How do I adjust the string on my Stihl weed eater?

A: The string on your Stihl weed eater can be adjusted to different lengths. This is done by turning the adjustment knob on the side of the string head. Turning the knob clockwise will make the string longer, and turning it counterclockwise will make the string shorter.

Q: What is the best type of string to use on my Stihl weed eater?

A: There are two main types of string that can be used on Stihl weed eaters: nylon and metal. Nylon string is the most common type of string and is a good choice for general-purpose weed eating. Metal string is more durable than nylon string and is a good choice for thick or tough weeds.

Q: How often should I change the string on my Stihl weed eater?

The frequency with which you need to change the string on your Stihl weed eater will depend on how often you use it and the type of weeds you are cutting. As a general rule, you should change the string when it starts to fray or become worn.

Q: What should I do if my Stihl weed eater is not cutting grass?

There are a few possible reasons why your Stihl weed eater might not be cutting grass. Here are a few things to check:

  • Make sure that the string is properly installed and adjusted.
  • Check the spark plug to make sure that it is clean and in good condition.
  • Clean the air filter to remove any dirt or debris.
  • If the problem persists, take your weed eater to a qualified service center for repairs.

    In this blog post, we have discussed how to change the string on a Stihl weed eater. We have provided step-by-step instructions, as well as tips and tricks to help you get the job done quickly and easily. We hope that this information has been helpful, and that you are now able to change the string on your Stihl weed eater with confidence.

Here are the key takeaways from this blog post:

  • To change the string on a Stihl weed eater, you will need to remove the old string, thread the new string through the eyelets, and then attach the new string to the spool.
  • The old string can be removed by unscrewing the spool cap and pulling out the old string.
  • The new string can be threaded through the eyelets by inserting the end of the string into the eyelet and pulling it through.
  • The new string can be attached to the spool by wrapping it around the spool and then inserting the end of the string into the hole in the spool cap.

We hope that this blog post has been helpful, and that you are now able to change the string on your Stihl weed eater with confidence.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.