How To Change Rear Wiper Blade?

How to Change a Rear Wiper Blade

Your rear wiper blade is an important part of your car’s safety system, helping to keep your rear window clear of water, snow, and debris. But like all parts of your car, it will eventually wear out and need to be replaced. Changing a rear wiper blade is a relatively simple task that can be completed in just a few minutes.

In this article, we’ll walk you through the steps of replacing a rear wiper blade on a typical car. We’ll also provide some tips and tricks to help you get the job done quickly and easily.

So if your rear wiper blade is starting to streak or chatter, don’t delay – follow these steps to get a new one installed today!

Step	Instructions	Image
1	Locate the rear wiper blade. It is usually located on the back of the car, near the top of the window.
2	Press down on the tab on the end of the wiper blade and pull it out.
3	Insert the new wiper blade into the wiper arm and snap it into place.

Your rear wiper blade is an important part of your car’s safety system. It helps to keep your rear window clear of water, snow, and other debris so that you can see clearly behind you while driving. If your rear wiper blade is worn out or damaged, it’s important to replace it as soon as possible.

This guide will show you how to change a rear wiper blade on a car. It’s a relatively simple task that can be completed in just a few minutes.

Tools and Materials Needed

To change a rear wiper blade, you will need the following tools and materials:

• Replacement rear wiper blade
• Wrench
• Disposable gloves
• Safety glasses

Step-by-step Instructions

1. Park your car in a well-lit area.
2. Open the trunk of your car.
3. Locate the rear wiper arm. It is usually located on the back of the car, near the top of the window.
4. Remove the old wiper blade. To do this, you will need to use a wrench to loosen the nut that holds the wiper blade in place. Once the nut is loose, you can pull the wiper blade off of the arm.
5. Install the new wiper blade. To do this, you will need to align the new wiper blade with the arm and then tighten the nut to secure it in place.
6. Test the wiper blade to make sure it is working properly.

Changing a rear wiper blade is a simple task that can be completed in just a few minutes. By following these steps, you can keep your rear window clear and safe for driving.

Here are some additional tips for changing a rear wiper blade:

• If you are having trouble removing the old wiper blade, you can try using a lubricant, such as WD-40, to loosen it.
• Make sure that the new wiper blade is the correct size for your car. You can find the correct size by looking at the old wiper blade or by checking your car’s owner’s manual.
• When installing the new wiper blade, be careful not to overtighten the nut. This could damage the wiper blade or the arm.
• Test the wiper blade to make sure it is working properly. If the wiper blade is not working properly, you may need to adjust it or replace it.

How To Change Rear Wiper Blade?

Park your car in a well-lit area.

It is important to park your car in a well-lit area so that you can see what you are doing. This is especially important if you are not familiar with changing a rear wiper blade.

Engage the parking brake.

Once you have parked your car in a well-lit area, you will need to engage the parking brake. This will help to keep your car from rolling while you are working on it.

Tools you will need

To change a rear wiper blade, you will need the following tools:

• A flat-head screwdriver
• A new rear wiper blade

Step-by-step instructions

1. Open the trunk of your car and locate the rear wiper arm. The rear wiper arm is typically located on the back of the car, near the top of the window.
2. Use the flat-head screwdriver to pry off the old wiper blade. Be careful not to damage the wiper arm.
3. Once the old wiper blade is removed, attach the new wiper blade to the wiper arm. Make sure that the new wiper blade is properly aligned with the window.
4. Use the flat-head screwdriver to secure the new wiper blade in place.
5. Close the trunk of your car.

Changing a rear wiper blade is a relatively simple task that can be completed in a few minutes. By following these steps, you can ensure that your rear wiper blade is working properly and that you can see clearly out of your rear window.

Additional tips

• If you are having trouble removing the old wiper blade, you can try using a lubricant, such as WD-40, to loosen it.
• Make sure that the new wiper blade is properly aligned with the window before you secure it in place. If the wiper blade is not aligned properly, it may not work properly.
• If you are not comfortable changing the rear wiper blade yourself, you can take your car to a mechanic.

  How do I change a rear wiper blade?

1. Locate the rear wiper blade. The rear wiper blade is typically located on the back of the car, behind the rear window. It is usually held in place by a small metal clip.
2. Remove the old wiper blade. To remove the old wiper blade, first use a flathead screwdriver to pry up the metal clip that is holding it in place. Then, carefully pull the wiper blade off of the wiper arm.
3. Install the new wiper blade. To install the new wiper blade, first align the wiper blade with the wiper arm. Then, snap the metal clip into place to secure the wiper blade.
4. Test the wiper blade. Once the new wiper blade is installed, turn on the wipers and check to make sure that they are working properly.

What tools do I need to change a rear wiper blade?

You will need the following tools to change a rear wiper blade:

• A flathead screwdriver
• A new rear wiper blade

How long does it take to change a rear wiper blade?

Changing a rear wiper blade typically takes about 5 minutes.

What is the difference between a rear wiper blade and a front wiper blade?

Rear wiper blades are typically shorter and thinner than front wiper blades. They are also designed to withstand the elements, such as rain, snow, and ice.

Can I change a rear wiper blade while the car is moving?

No, you should never change a rear wiper blade while the car is moving. This is because you could be injured if the wiper blade comes loose and hits you.

What should I do if my rear wiper blade is not working properly?

If your rear wiper blade is not working properly, there are a few things you can check:

• Make sure that the wiper blade is properly installed.
• Check the wiper fluid reservoir to make sure that it is full.
• If the wiper blade is still not working, you may need to replace it.

Where can I buy a rear wiper blade?

You can buy a rear wiper blade at most auto parts stores. You can also order a rear wiper blade online.

Changing a rear wiper blade is a simple task that can be completed in a few minutes. By following the steps in this guide, you can ensure that your rear wiper is working properly and that you can see clearly out of the back window of your vehicle.

Here are the key takeaways from this guide:

• The first step is to locate the rear wiper arm. This is usually located on the back of the vehicle, near the top of the window.
• Once you have located the rear wiper arm, you will need to remove the old wiper blade. To do this, grasp the wiper blade firmly and pull it away from the arm.
• To install the new wiper blade, simply align the new blade with the wiper arm and snap it into place. Make sure that the new blade is properly seated and that it is securely attached to the arm.
• Test the wiper blade to make sure that it is working properly. The wiper blade should move smoothly across the window and should not leave any streaks.

By following these steps, you can easily change your rear wiper blade and keep your vehicle safe on the road.