How To Change Mileage On Harley Speedometer?

How to Change Mileage on a Harley Speedometer

Your Harley-Davidson’s odometer is a valuable tool that can help you track your bike’s mileage and maintain its overall condition. However, if the odometer is inaccurate, it can be difficult to know how far you’ve actually ridden your bike and when it’s time for maintenance. Fortunately, changing the mileage on a Harley speedometer is a relatively simple process that can be completed in just a few minutes.

In this article, we’ll walk you through the steps of changing the mileage on your Harley speedometer, including what tools you’ll need and what to do if you run into any problems. So whether you’re just curious about how to do it or you need to correct an inaccurate odometer, read on for all the information you need.

How To Change Mileage On Harley Speedometer?

| Step | Action | Description |
|—|—|—|
| 1 | Turn the ignition key to the OFF position. | This will power down the bike’s electrical system. |
| 2 | Locate the reset button on the speedometer. | The reset button is typically located on the bottom right-hand side of the speedometer. |
| 3 | Press and hold the reset button for 5 seconds. | This will reset the odometer to 0. |

How to Change Mileage on Harley Speedometer?

What You Need

  • A Harley speedometer
  • A Phillips head screwdriver
  • A flathead screwdriver
  • A new odometer gear
  • A new speedometer cable
  • A can of contact cleaner

How to Remove the Speedometer

1. Locate the speedometer housing. The speedometer housing is a metal box that is usually located on the left side of the bike, near the front wheel. It is held in place by two bolts.
2. Remove the bolts that hold the speedometer housing in place. Use a Phillips head screwdriver to loosen the two bolts that hold the speedometer housing in place. Once the bolts are loose, you can carefully pry the housing open with a flathead screwdriver.
3. Disconnect the speedometer cable. The speedometer cable is a thin metal cable that connects the speedometer to the transmission. It is usually located at the back of the speedometer housing. To disconnect the cable, simply pull it out of the housing.
4. Remove the odometer gear. The odometer gear is a small gear that is located inside the speedometer housing. It is held in place by a small screw. To remove the gear, use a small flathead screwdriver to loosen the screw and then carefully remove the gear.
5. Install the new odometer gear. Once the old odometer gear is removed, you can install the new one. Make sure that the gear is properly seated in the housing and then tighten the screw to secure it in place.
6. Reattach the speedometer cable. Once the new odometer gear is installed, you can reattach the speedometer cable. Simply push the cable back into the housing and make sure that it is properly seated.
7. Replace the speedometer housing. Once the speedometer cable is reattached, you can replace the speedometer housing. Make sure that the housing is properly aligned and then tighten the two bolts to secure it in place.

How to Reset the Odometer

1. Turn the ignition switch to the “On” position.
2. Press and hold the “Reset” button on the speedometer.
3. While holding the “Reset” button, turn the ignition switch to the “Off” position.
4. Release the “Reset” button.

The odometer will now be reset to zero.

Changing the mileage on a Harley speedometer is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can easily change the mileage on your Harley speedometer and keep your bike running smoothly.

How To Change Mileage On Harley Speedometer?

1. Remove the speedometer

To remove the speedometer, you will need to:

1. Locate the speedometer housing. The speedometer housing is located on the front of the bike, just below the handlebars. It is a round, metal housing with a glass face.
2. Remove the screws that hold the speedometer housing in place. There are usually two screws located on the bottom of the housing. Use a Phillips head screwdriver to remove the screws.
3. Pry the speedometer housing open. Use a small flathead screwdriver to pry the speedometer housing open. Be careful not to damage the housing.
4. Remove the speedometer from the housing. The speedometer is a round, black device with a needle and numbers. It is held in place by a small metal clip. Use a small flathead screwdriver to pry the clip open and remove the speedometer.

2. Remove the odometer gear

To remove the odometer gear, you will need to:

1. Locate the odometer gear. The odometer gear is a small, metal gear located inside the speedometer housing. It is usually located near the bottom of the housing.
2. Remove the screws that hold the odometer gear in place. There are usually two screws located on the side of the gear. Use a Phillips head screwdriver to remove the screws.
3. Pry the odometer gear out of the housing. Use a small flathead screwdriver to pry the odometer gear out of the housing. Be careful not to damage the gear.

3. Remove the fuel tank

To remove the fuel tank, you will need to:

1. Locate the fuel tank release lever. The fuel tank release lever is located on the left side of the bike, under the seat.
2. Push the fuel tank release lever down. This will release the fuel tank from the bike.
3. Lift the fuel tank up and off of the bike. Be careful not to spill any gasoline.

4. Disconnect the speedometer cable from the back of the speedometer

To disconnect the speedometer cable from the back of the speedometer, you will need to:

1. Locate the speedometer cable. The speedometer cable is a small, black cable that connects the speedometer to the transmission. It is usually located on the right side of the bike, near the front wheel.
2. Disconnect the speedometer cable from the back of the speedometer. There is a small, black connector on the back of the speedometer. Use a small flathead screwdriver to pry the connector open and disconnect the cable.

5. Remove the old odometer gear

To remove the old odometer gear, you will need to:

1. Locate the old odometer gear. The old odometer gear is a small, metal gear that is located inside the speedometer housing. It is usually located near the bottom of the housing.
2. Remove the screws that hold the old odometer gear in place. There are usually two screws located on the side of the gear. Use a Phillips head screwdriver to remove the screws.
3. Pry the old odometer gear out of the housing. Use a small flathead screwdriver to pry the old odometer gear out of the housing. Be careful not to damage the gear.

6. Install the new odometer gear

To install the new odometer gear, you will need to:

1. Locate the new odometer gear. The new odometer gear is a small, metal gear that is the same size and shape as the old odometer gear.
2. Install the new odometer gear in the housing. Make sure that the gear is properly aligned and that the screws are tight.
3. Reconnect the speedometer cable to the back of the speedometer. Use a small flathead screwdriver to pry the connector open and reconnect the cable.

7. Reinstall the speedometer housing

To reinstall the speedometer housing, you will need to:

1. Align the speedometer housing with the bike. Make sure that the housing is properly aligned with the bike and that the screws are in the correct holes.
2. Install the screws that hold the speedometer housing in place. Use a Phillips head screwdriver to install the screws.
3. Pry the speedometer housing closed. Use a small flathead screwdriver to pry the speedometer housing closed. Be careful not to damage the

How to Change Mileage on Harley Speedometer?

Q: What tools do I need to change the mileage on my Harley speedometer?

A: You will need the following tools:

  • A Phillips head screwdriver
  • A Torx T-25 screwdriver
  • A small flathead screwdriver
  • A new odometer gear
  • Adhesive sealant

Q: How do I remove the speedometer from my Harley?

A: 1. Turn the ignition off and disconnect the negative battery cable.
2. Remove the four screws that hold the speedometer housing in place.
3. Pry the speedometer housing off of the handlebars.
4. Disconnect the speedometer cable from the back of the speedometer.
5. Remove the old odometer gear from the speedometer.

Q: How do I install the new odometer gear?

A: 1. Apply a small amount of adhesive sealant to the new odometer gear.
2. Insert the new odometer gear into the speedometer.
3. Rotate the odometer gear until it is properly seated.
4. Reconnect the speedometer cable to the back of the speedometer.
5. Reinstall the speedometer housing.
6. Tighten the four screws that hold the speedometer housing in place.
7. Reconnect the negative battery cable.

Q: How do I reset the mileage on my Harley speedometer?

A: Once you have installed the new odometer gear, you will need to reset the mileage on your Harley speedometer. To do this, follow these steps:

1. Turn the ignition on.
2. Press and hold the reset button on the speedometer.
3. While holding the reset button, turn the ignition off.
4. Release the reset button.
5. The mileage on your speedometer will be reset to zero.

Q: What if I make a mistake when resetting the mileage?

A: If you make a mistake when resetting the mileage, you can simply repeat the steps above. Be sure to hold the reset button down for the entire time that you are turning the ignition off.

Q: How often should I change the odometer gear on my Harley?

A: The odometer gear on your Harley should be replaced every 50,000 miles. However, if you notice that your speedometer is not reading correctly, you may need to replace the odometer gear sooner.

Q: Where can I buy a new odometer gear for my Harley?

A: You can purchase a new odometer gear for your Harley at most Harley-Davidson dealerships or online retailers.

In this article, we have discussed how to change the mileage on a Harley speedometer. We have provided step-by-step instructions on how to do this, as well as some tips and tricks to help you along the way. We hope that this article has been helpful, and that you are now able to change the mileage on your Harley speedometer with ease.

Here are some key takeaways from this article:

  • Changing the mileage on a Harley speedometer is a relatively simple process, but it is important to follow the steps carefully to avoid damaging your bike.
  • Before you begin, make sure that you have the right tools and materials.
  • The first step is to remove the speedometer from the bike.
  • Once the speedometer is removed, you can access the odometer gear and remove it.
  • You can then use a small screwdriver to turn the odometer gear until the desired mileage is displayed.
  • Finally, reinstall the odometer gear and the speedometer.

By following these steps, you can easily change the mileage on your Harley speedometer.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.