How To Change Dashboard Display Honda Cr V?

How to Change Dashboard Display Honda CR-V

Your Honda CR-V’s dashboard display is a valuable source of information, providing you with everything from your current speed to your fuel level. But what if you want to change the display? Maybe you want to see more information, or you want to change the way it looks. Whatever the reason, changing your dashboard display is a relatively simple process that can be completed in just a few minutes.

In this article, we’ll walk you through the steps of changing your Honda CR-V’s dashboard display. We’ll cover everything from finding the right menu to making your changes. So whether you’re a first-time owner or you’ve just never had the need to change your display before, read on for all the information you need.

Step Action Explanation
1 Turn the ignition to the ON position. This will power on the dashboard display.
2 Press and hold the DISP button. This will bring up the display settings menu.
3 Use the arrow buttons to select the desired display mode. The available display modes are:

  • Normal
  • Eco
  • Sport
  • Individual
4 Press the DISP button again to save your changes. The new display mode will be activated.

Tools and Materials Needed

  • Phillips head screwdriver
  • Torx T20 screwdriver
  • Tape measure
  • Safety glasses

Steps to Change the Dashboard Display

1. Disconnect the battery. The first step is to disconnect the battery to prevent any electrical shorts. Locate the battery in the engine bay and disconnect the negative terminal.
2. Remove the dashboard cover. The dashboard cover is held in place by a series of clips. Use a Phillips head screwdriver to pry up the clips and remove the cover.
3. Disconnect the wiring harness. The wiring harness for the dashboard display is located behind the cover. Use a Torx T20 screwdriver to disconnect the harness.
4. Remove the dashboard display. The dashboard display is held in place by a series of screws. Use a Phillips head screwdriver to remove the screws and remove the display.
5. Install the new dashboard display. Align the new dashboard display with the mounting holes and install the screws.
6. Reconnect the wiring harness. Reconnect the wiring harness to the dashboard display.
7. Reinstall the dashboard cover. Reinstall the dashboard cover and secure it with the clips.
8. Reconnect the battery. Reconnect the battery to the vehicle.

Note: Before you begin, it is important to read your vehicle’s owner’s manual for specific instructions on how to change the dashboard display.

Changing the dashboard display on a Honda CR-V is a relatively straightforward process. By following the steps outlined in this guide, you can easily replace your old display with a new one.

How To Change Dashboard Display Honda Cr V

The Honda CR-V is a popular SUV that is known for its reliability and fuel efficiency. However, the dashboard display can sometimes become damaged or outdated. If this happens, you may want to consider replacing it.

Replacing the dashboard display on a Honda CR-V is a relatively simple task that can be completed in about an hour. However, it is important to follow the steps carefully to avoid damaging the dashboard.

Here are the steps on how to change the dashboard display on a Honda CR-V:

1. Gather your tools. You will need the following tools to complete this task:

  • A Phillips head screwdriver
  • A Torx T20 screwdriver
  • A pry tool
  • A plastic trim removal tool

2. Disconnect the negative battery terminal. Before you begin working on the dashboard, you must disconnect the negative battery terminal to prevent any electrical shorts.

1. Locate the negative battery terminal on the battery.
2. Use the Phillips head screwdriver to remove the bolt that secures the negative battery terminal to the battery.
3. Disconnect the negative battery terminal from the battery.

3. Turn off the ignition and disconnect the negative battery terminal. Once you have disconnected the negative battery terminal, you can turn off the ignition and disconnect the negative battery terminal.

1. Locate the ignition switch.
2. Turn the ignition switch to the “Off” position.
3. Disconnect the negative battery terminal from the battery.

4. Remove the trim panel around the steering wheel. To remove the trim panel around the steering wheel, you will need to use a pry tool and a plastic trim removal tool.

1. Locate the trim panel around the steering wheel.
2. Use the pry tool to pry up the trim panel.
3. Use the plastic trim removal tool to remove the clips that secure the trim panel to the dashboard.

5. Disconnect the wiring harness. Once you have removed the trim panel around the steering wheel, you can disconnect the wiring harness.

1. Locate the wiring harness that connects to the dashboard display.
2. Use the Torx T20 screwdriver to remove the screw that secures the wiring harness to the dashboard.
3. Disconnect the wiring harness from the dashboard display.

6. Remove the dashboard display. To remove the dashboard display, you will need to use a pry tool and a plastic trim removal tool.

1. Locate the dashboard display.
2. Use the pry tool to pry up the dashboard display.
3. Use the plastic trim removal tool to remove the clips that secure the dashboard display to the dashboard.

7. Install the new dashboard display. To install the new dashboard display, you will need to reverse the steps that you took to remove the old dashboard display.

1. Align the new dashboard display with the mounting holes in the dashboard.
2. Secure the new dashboard display to the dashboard using the screws that you removed from the old dashboard display.
3. Reconnect the wiring harness to the new dashboard display.
4. Reattach the trim panel around the steering wheel.
5. Reconnect the negative battery terminal.

8. Test the new dashboard display. Once you have installed the new dashboard display, you should test it to make sure that it is working properly.

1. Turn on the ignition.
2. Verify that the dashboard display is displaying the correct information.

If the dashboard display is not displaying the correct information, you may need to adjust the settings.

Turn off the ignition and disconnect the negative battery terminal

Before you begin working on the dashboard, you must disconnect the negative battery terminal to prevent any electrical shorts.

To disconnect the negative battery terminal, follow these steps:

1. Locate the negative battery terminal on the battery.
2. Use the Phillips head screwdriver to remove the bolt that secures the negative battery terminal to the battery.
3. Disconnect the negative battery terminal from the battery.

Once you have disconnected the negative battery terminal, you can begin working on the dashboard.

Remove the trim panel around the steering wheel

To remove the trim panel around the steering wheel, you will need to use a pry tool and a plastic trim removal tool.

1. Locate the trim panel around the steering wheel.
2. Use the pry tool to pry up the trim panel.
3. Use the plastic trim removal tool to remove the clips that secure the trim panel to the dashboard.

Once you have removed the trim panel

How do I change the dashboard display on my Honda CR-V?

1. Press and hold the “Menu” button on the steering wheel.
2. Use the “Volume” buttons to scroll to the “Display” option.
3. Press the “Menu” button to open the display menu.
4. Use the “Volume” buttons to scroll to the desired display mode.
5. Press the “Menu” button to confirm your selection.

What are the different dashboard display modes on my Honda CR-V?

The Honda CR-V offers a variety of dashboard display modes, including:

  • Normal mode: This is the default display mode, which shows the odometer, trip meter, and other essential information.
  • Eco mode: This mode shows information about fuel economy, such as the current fuel economy and the average fuel economy.
  • Sport mode: This mode shows information about performance, such as the current engine speed and the gear that the transmission is in.
  • Navigation mode: This mode shows the navigation map and other navigation information.
  • Audio mode: This mode shows the audio information, such as the current song and the volume level.

How do I change the brightness of the dashboard display on my Honda CR-V?

1. Press and hold the “Menu” button on the steering wheel.
2. Use the “Volume” buttons to scroll to the “Display” option.
3. Press the “Menu” button to open the display menu.
4. Use the “Volume” buttons to scroll to the “Brightness” option.
5. Press the “Menu” button to open the brightness slider.
6. Use the “Volume” buttons to adjust the brightness level.
7. Press the “Menu” button to confirm your selection.

How do I reset the dashboard display on my Honda CR-V?

1. Turn off the ignition.
2. Press and hold the “Menu” button on the steering wheel.
3. Turn on the ignition.
4. Release the “Menu” button.
5. The dashboard display will be reset.

What should I do if my dashboard display is not working properly?

If your dashboard display is not working properly, you should take your vehicle to a Honda dealer for service. The dealer will be able to diagnose the problem and repair the dashboard display.

In this blog post, we have discussed how to change the dashboard display on a Honda CR-V. We have provided step-by-step instructions on how to do this, as well as some tips and tricks to help you along the way. We hope that this information has been helpful, and that you are now able to change the dashboard display on your Honda CR-V with ease.

Here are some key takeaways from this blog post:

  • The dashboard display on a Honda CR-V can be changed by following a few simple steps.
  • The first step is to locate the dimmer switch.
  • The second step is to press and hold the dimmer switch until the display changes.
  • The third step is to use the arrow keys to select the desired display.
  • The fourth step is to press the enter button to confirm your selection.

We hope that this blog post has been helpful, and that you are now able to change the dashboard display on your Honda CR-V with ease.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.