How To Calibrate Lippert Leveling System?

How to Calibrate Your Lippert Leveling System

Your Lippert leveling system is an essential part of your RV, providing a stable and level platform for you to enjoy your travels. But if your system isn’t properly calibrated, it can be difficult to get your RV level, and you may experience problems with leaks, water damage, and even accidents.

Luckily, calibrating your Lippert leveling system is a relatively simple process that can be completed in just a few minutes. In this article, we’ll walk you through the steps of calibrating your system, so you can be sure that it’s working properly and keeping your RV safe and secure.

What is a Lippert Leveling System?

A Lippert leveling system is a hydraulic leveling system that uses electric actuators to raise and lower your RV’s jacks. This allows you to level your RV on uneven ground, providing a stable platform for you to cook, sleep, and relax.

Lippert leveling systems are available in a variety of sizes and capacities, so you can find the perfect system for your RV. They’re also relatively easy to install, and most systems can be installed in just a few hours.

Why Do I Need to Calibrate My Lippert Leveling System?

Over time, your Lippert leveling system may become out of calibration. This can happen due to a number of factors, including wear and tear, environmental conditions, and improper use.

When your leveling system is out of calibration, it can be difficult to get your RV level. This can lead to a number of problems, including:

  • Leaks: If your RV is not level, water can pool under the chassis and seep into the interior, causing damage to your RV’s structure and components.
  • Water damage: If your RV is not level, the weight of the water can cause damage to your RV’s flooring, walls, and furniture.
  • Accidents: If your RV is not level, it can be more difficult to control, increasing the risk of accidents.

How Do I Calibrate My Lippert Leveling System?

Calibrating your Lippert leveling system is a relatively simple process that can be completed in just a few minutes. To calibrate your system, follow these steps:

1. Park your RV on a level surface. This is the most important step in the calibration process, as it ensures that your system is properly calibrated.
2. Turn on your RV’s power. This will activate the leveling system’s electric actuators.
3. Locate the leveling system’s control panel. The control panel is typically located in the driver’s seat area.
4. Press the “Calibrate” button on the control panel. This will start the calibration process.
5. Follow the on-screen instructions to complete the calibration process. The calibration process typically takes a few minutes to complete.

Once the calibration process is complete, your leveling system will be properly calibrated and you’ll be able to enjoy a level and stable RV.

Step Instructions Image
1 Turn off the leveling system.
2 Unlock the leveling jacks.
3 Raise each leveling jack until it is fully extended.
4 Turn on the leveling system.
5 Press and hold the “Calibrate” button until the leveling system beeps.
6 The leveling system is now calibrated.

How To Calibrate Lippert Leveling System?

The Lippert leveling system is a popular choice for RVs and trailers because it is easy to use and provides a level and stable platform for camping. However, over time, the leveling system can become out of calibration and need to be adjusted. This guide will show you how to calibrate your Lippert leveling system so that it is providing the best possible performance.

Step 1: Gather the necessary tools and materials.

To calibrate your Lippert leveling system, you will need the following tools and materials:

  • Lippert leveling system manual
  • Phillips head screwdriver
  • Wrench
  • Level
  • Tape measure
  • Chalk

Step 2: Locate the leveling system controls.

The leveling system controls are typically located on the inside of the camper, near the door. There will be a series of buttons or switches that control the leveling jacks.

Step 3: Inspect the leveling system.

Before you begin calibrating the leveling system, it is important to inspect it for any damage or wear. If you find any damage, you will need to repair it before you can continue.

Step 4: Level the camper.

The first step in calibrating the leveling system is to level the camper. This can be done by using a level and a tape measure.

1. Place the level on a flat surface inside the camper.
2. Adjust the leveling jacks until the bubble in the level is centered.
3. Measure the height of the camper at each corner.
4. Make sure that the height of the camper is the same at each corner.

Step 5: Calibrate the leveling system.

Once the camper is level, you can begin calibrating the leveling system.

1. Turn on the leveling system.
2. Press the button or switch that corresponds to the leveling jack you want to adjust.
3. Use the wrench to turn the leveling jack until the indicator light turns green.
4. Repeat steps 2-3 for each leveling jack.

Step 6: Test the leveling system.

Once you have calibrated the leveling system, you should test it to make sure that it is working properly.

1. Place the level on a flat surface inside the camper.
2. Adjust the leveling jacks until the bubble in the level is centered.
3. Measure the height of the camper at each corner.
4. Make sure that the height of the camper is the same at each corner.

If the height of the camper is not the same at each corner, you will need to adjust the leveling system again.

Calibrating your Lippert leveling system is a relatively simple process that can be completed in a few minutes. By following these steps, you can ensure that your leveling system is providing the best possible performance and that your camper is level and stable.

Step 3: Activate the leveling system.

Once you have plugged in the leveling system and connected the hoses, you can activate it by pressing the button or switch on the control panel. The leveling jacks will then extend or retract until the camper is level.

Step 4: Check the level of the camper.

Once the leveling system has activated, you should check the level of the camper using a level. The camper should be level front to back and side to side. If the camper is not level, you can adjust the leveling jacks until it is.

Troubleshooting

If the leveling system is not working properly, there are a few things you can check:

  • Make sure that the leveling system is plugged in and that the hoses are connected properly.
  • Check the fuses in the leveling system. If a fuse is blown, replace it with a new one.
  • Try resetting the leveling system. To do this, press and hold the button or switch on the control panel for 10 seconds.
  • If the leveling system is still not working, you may need to have it serviced by a qualified technician.

Calibrating your Lippert leveling system is a simple process that can help you ensure that your camper is level and safe to drive. By following these steps, you can easily calibrate your leveling system and enjoy a comfortable and safe camping experience.

How do I calibrate my Lippert leveling system?

1. Turn off the leveling system.
2. Locate the leveling system control panel. The control panel is typically located on the inside of the camper, near the door.
3. Press and hold the “Cal” button for 5 seconds. The leveling system will beep and the display will show “Cal”.
4. Use the up and down arrows to select the axle you want to calibrate. The axles are typically labeled “A” and “B”.
5. Press the “Enter” button. The leveling system will begin to calibrate the axle.
6. Once the calibration is complete, the display will show “Cal Complete”.
7. Turn on the leveling system.

What if my leveling system is not leveling my camper properly?

There are a few possible reasons why your leveling system may not be leveling your camper properly.

  • The leveling system may be out of calibration. Try calibrating the leveling system as described above.
  • The leveling system may be damaged. If you think the leveling system is damaged, you should have it serviced by a qualified technician.
  • The camper may be unevenly loaded. Make sure that the camper is evenly loaded before trying to level it.

**How often should I calibrate my leveling system?

You should calibrate your leveling system every time you change the weight distribution of your camper. This includes adding or removing cargo, passengers, or water.

What are the benefits of having a leveling system on my camper?

A leveling system can provide a number of benefits, including:

  • Improved safety. A level camper is less likely to roll over.
  • Increased comfort. A level camper is more comfortable to drive and sleep in.
  • Reduced wear and tear on your camper. A level camper will put less stress on your tires, suspension, and other components.

Where can I get a leveling system for my camper?

You can find leveling systems for campers at a variety of retailers, including online retailers, RV dealerships, and camping supply stores.

In this blog post, we have discussed how to calibrate a Lippert leveling system. We have covered the steps involved in the process, as well as some tips and tricks to help you get the job done correctly. We hope that this information has been helpful, and that you are now able to calibrate your Lippert leveling system with ease.

Here are some key takeaways from this blog post:

  • The Lippert leveling system is a valuable tool that can help you level your RV quickly and easily.
  • Calibrating the leveling system is important to ensure that it is working properly.
  • The leveling system can be calibrated by following the steps outlined in this blog post.
  • If you have any questions about calibrating the leveling system, you can consult your RV owner’s manual or contact Lippert customer service.

Author Profile

Against Austerity
Against Austerity
Previously, our website was dedicated to the work of United Front Against Austerity (UFAA). Focused on addressing the economic challenges in the United States, UFAA was committed to fighting against austerity measures that threatened essential social programs. The group emphasized the need for substantial financial reforms to alleviate the economic depression, highlighting two key demands: Implementing a 1% Wall Street Sales Tax and Nationalization of the Federal Reserve System.

In 2023, our website underwent a significant transformation, pivoting from its previous focus on economic and political advocacy to becoming a resource for empowering people through information. Recognizing the evolving needs of our audience, we shifted towards providing in-depth, informative articles that address pressing questions and queries from various fields.

Our website’s transformation is a reflection of our commitment to providing valuable, in-depth information that empowers our readers. By adapting to changing times and needs, we strive to be a trusted source of knowledge and insight in an increasingly complex world.